Schlage ND80JD Ath 613 Grade 1 Storeroom Lock

Product Description

The SCHLAGE ND80JD ATH 613 is a Grade 1 commercial storeroom lock designed for high-traffic, security-critical door applications. It features the Athens lever trim and is prepared for Schlage Full Size Interchangeable Core (FSIC) installation but ships without a core, allowing facilities to integrate their existing key system. The Oil Rubbed Bronze (613) finish provides a dark, oxidized appearance suited for institutional and commercial interiors. This is a non-handed unit, meaning it installs on doors with either a left-hand or right-hand swing without modification. Licensed locksmiths, security contractors, and facilities maintenance professionals typically specify and install this hardware.

This storeroom lock is intended for commercial and institutional applications where exterior entry must be controlled from both sides. Storeroom function means the lever on the outside is always locked and requires a key or credential to retract the latch, while the inside lever remains free for egress at all times. Typical install locations include server rooms, stockrooms, utility closets, pharmacies, and similar controlled-access spaces. The FSIC prep accommodates a wide range of interchangeable core cylinders for facilities running a master-key or large-format IC system.

Key Features

• Grade 1 ANSI/BHMA rating for heavy-duty commercial door applications
• Storeroom function: outside lever always locked, inside lever always free for egress
• Athens (ATH) lever design for commercial aesthetic compatibility
• Schlage FSIC prep ships less core, compatible with full-size interchangeable core cylinders
• Non-handed design installs on left- or right-hand doors without adjustment
• Oil Rubbed Bronze (613) finish for institutional and commercial interior applications

Compatibility

Designed as an FSIC-prep replacement or new-installation storeroom lock for commercial doors using Schlage Full Size Interchangeable Core cylinders. Compatible with standard ANSI A115 series door prep. No core is included; the end user must supply a compatible FSIC cylinder.

Installation Notes

Installation should be performed by a licensed locksmith or qualified security hardware technician familiar with commercial cylindrical lock sets and ANSI door prep standards. Verify that the door and frame meet ANSI A115 series boring and strike requirements before installation. Power is not required for this mechanical lock, but confirm door alignment and latch engagement before completing the install. Core insertion and key system integration should follow the core manufacturer's procedures and any applicable facility security policy.