Schlage ND80BDEU Ath 613 Electrified Cylindrical Lock

Product Description

The SCHLAGE ND80BDEU ATH 613 is a Grade 1 electrified cylindrical lock configured for storeroom function. It accepts 12-24 VDC input and operates in fail-secure mode, meaning the latch remains locked if power is interrupted. The lever trim is the Athens style finished in oil rubbed bronze (finish code 613). The lock is prepped for Small Format Interchangeable Core (SFIC) cylinders, making it compatible with Best and other SFIC keyways commonly deployed in commercial access control systems. Backset is 2-3/4 inches. This hardware is specified and installed by licensed locksmiths, access control technicians, and commercial door hardware contractors.

This lock is suited for commercial and institutional applications where controlled entry is required at storeroom, server room, pharmacy, or secured office doors. In storeroom function, the outside lever is always locked and can only be retracted by credential or electrical signal, while the inside lever provides free egress at all times. The electrified trim allows integration with access control panels, card readers, and request-to-exit devices. It is designed for hollow metal and wood door applications that meet standard ANSI door prep dimensions.

Key Features

• Grade 1 commercial duty cylindrical lock meets ANSI/BHMA A156.2 Series 4000 standards
• Storeroom function: outside lever locked at all times, inside lever always free for egress
• Fail-secure operation: lock remains locked during power loss, preserving security
• 12-24 VDC dual-voltage input accommodates a wide range of access control power supplies
• SFIC prep accepts Small Format Interchangeable Core cylinders for large-scale keying programs
• Athens lever trim in oil rubbed bronze (613) finish for commercial aesthetics
• 2-3/4 inch backset fits standard commercial door preparations

Compatibility

Designed as an OEM-style replacement or new-installation cylindrical lock for commercial doors requiring Grade 1 electrified storeroom hardware with SFIC core preparation.

Installation Notes

Installation should be performed by a licensed locksmith or qualified access control technician familiar with ANSI door prep requirements and low-voltage wiring practices. Disconnect and lock out all access control power supply circuits before servicing or replacing electrified hardware. Verify door edge prep, backset, and cross-bore dimensions prior to installation to ensure proper fit. Low-voltage wiring must comply with applicable NEC requirements for Class 2 circuits.