Schlage Commercial 09774 Sfic Driver and Spacers Nd Series

Product Description

The SCHLAGE COMMERCIAL 09774 is a Small Format Interchangeable Core (SFIC) driver and spacers kit designed for use with the ND Series lockset platform. This component provides the mechanical interface between the SFIC core and the lock chassis, allowing the interchangeable core to seat, rotate, and actuate correctly within the lockset body. The kit is a small, lightweight assembly weighing 0.02 pounds and measuring 3 inches in length, 2 inches in width, and 0.5 inches in height. Installation is typically performed by a licensed locksmith or commercial door hardware technician during core replacement or lock servicing operations.

This driver and spacers kit is intended for use in commercial and institutional access control applications where SFIC cylinders are deployed. SFIC systems are commonly specified in facilities that require frequent rekeying across multiple openings without pulling the entire lockset. The 09774 supports that workflow by ensuring proper mechanical fitment within the ND Series chassis during core change-out procedures.

Key Features

• Compatible with Small Format Interchangeable Core (SFIC) cylinders in ND Series locksets
• Compact form factor: 3 inches long, 2 inches wide, 0.5 inches high
• Lightweight component at 0.02 pounds for easy handling during service
• Sold as a single unit (EA) for precise replacement or service stock ordering
• Supports core change-out without full lockset removal

Compatibility

Designed for use with SCHLAGE COMMERCIAL ND Series locksets equipped with Small Format Interchangeable Core (SFIC) cylinders.

Installation Notes

Installation should be performed by a licensed locksmith or qualified commercial door hardware technician. Before servicing, ensure the door is held open in a safe position and that any access control power to the lockset is disconnected if applicable. Follow the ND Series lockset service documentation for proper core removal and driver seating procedures. Do not force the core into the chassis if the driver or spacers are not correctly aligned, as this can damage the cylinder or lockset body.