Schlage ALX10 Sat 626 Lever Lockset Grade 2 Keyless

Product Description

The SCHLAGE ALX10 SAT 626 is a Grade 2 lever lockset designed for commercial door applications. Built from brass with a satin chrome finish, this keyless unit provides passage or non-keyed function — meaning the lever operates freely without a key cylinder. It is non-handed, so it installs on left- or right-swing doors without modification. The 2.75-inch backset fits standard commercial door prep, and the unit accommodates door thicknesses from 1.375 inches to 1.75 inches. Facilities managers, commercial locksmiths, and general contractors typically specify this lockset for interior commercial doors where access control is not required.

This lockset is suited for interior commercial installations where a non-keyed lever function is needed. Common applications include office corridors, storage rooms, break rooms, and similar spaces where free passage is the requirement. The non-handed design simplifies inventory management for contractors servicing multiple doors. The satin chrome finish coordinates with standard commercial hardware finishes across most commercial building programs.

Key Features

• Grade 2 commercial-duty rating for interior door applications
• Keyless, non-keyed cylinder type — lever operates without a key
• Non-handed design fits left- or right-swing doors without adjustment
• Brass construction with satin chrome (626) finish
• 2.75-inch backset fits standard commercial door bore prep
• Accommodates door thicknesses from 1.375 inches to 1.75 inches

Compatibility

Designed for commercial interior door installations requiring a Grade 2 non-keyed lever lockset with a 2.75-inch backset and door thickness range of 1.375 inches to 1.75 inches.

Installation Notes

Installation is performed by a licensed locksmith or qualified contractor familiar with commercial door hardware. Verify door bore dimensions and backset measurement before installation. Ensure the door is stationary and latch bolt alignment is confirmed before tightening all mounting fasteners. Consult local building codes for any access or egress requirements that may affect non-keyed lockset placement on specific door openings.