Sargent SF-10XG70 Ll 26D Electrified Cylindrical Lock

Product Description

The SARGENT SF-10XG70 LL 26D is a Grade 1 electrified cylindrical lock configured in a fail-safe operation mode, meaning the lock releases upon loss of power to allow free egress. It features an L lever handle paired with an L rose trim and is finished in satin chrome (26D). The unit ships less core and is prepped for Schlage Full-Size Interchangeable Core (FSIC) cylinders. A deadlatch mechanism provides positive latch retention during normal operation. This lock is non-handed, making it suitable for either door hand without field modification. It is designed for commercial access control applications where electrified hardware is integrated into an electronic access control system.

This lock is intended for commercial interior or secured-entry door applications where controlled access is required. The fail-safe configuration is commonly specified for life-safety compliance in spaces requiring free egress during a power failure or fire alarm event. The FSIC prep allows the end user or locksmith to install a full-size interchangeable core once the appropriate core is sourced separately. The L lever and L rose combination provides a standard commercial trim profile suited to office, institutional, and light industrial environments.

Key Features

• Grade 1 commercial-duty cylindrical lock construction for high-cycle, high-traffic applications
• Fail-safe operation - lock releases (unlocks) when power is removed
• Schlage FSIC prep with less core - core sourced and installed separately
• L lever with L rose trim in satin chrome (26D) finish
• Deadlatch included for positive latch engagement and anti-shimming protection
• Non-handed design installs on either hand door without modification

Compatibility

Designed as an OEM-style electrified cylindrical lock replacement or new installation for commercial doors requiring Schlage Full-Size Interchangeable Core prep. Compatible with standard cylindrical lock door prep per ANSI/BHMA standards. Core must be sourced separately.

Installation Notes

Installation should be performed by a licensed locksmith or qualified access control technician familiar with electrified hardware and low-voltage wiring practices. Disconnect and lock out all electrical power to the door hardware circuit before servicing or replacing the lock chassis. Verify door prep dimensions meet ANSI cylindrical lock bore specifications before installation. Coordinate with the access control panel configuration to confirm fail-safe power requirements and circuit protection are correctly matched to the hardware.