Sargent 70-776 Etl 24V Lhrb 26D Electrified Exit Device Trim

Product Description

The SARGENT 70-776 ETL 24V LHRB 26D is a Grade 1 electrified exit device trim designed for fail-secure operation at 24 volts. When power is removed, the lever locks, preventing entry from the outside while maintaining egress compliance. A key retracts the latch manually, providing a secondary means of access without electrical power. This trim is built for high-traffic commercial doors where controlled access and code-compliant egress must coexist. It features an SFIC (Small Format Interchangeable Core) prep supplied less core, allowing the end user to install a preferred core from a compatible keying system. Finished in Satin Chrome (26D), it suits commercial interior and vestibule applications where a clean, durable appearance is required.

This trim is designed for use with SARGENT Surface Vertical Rod and Mortise exit devices in the 8700 and 8900 Series. It is configured for Left Hand Reverse (LHR) door handing with an L Lever design. Typical installations include commercial office buildings, schools, healthcare facilities, and institutional settings where electrified access control is integrated with panic hardware. A licensed locksmith or access control technician familiar with electrified exit hardware and SFIC keying systems typically handles installation and core fitting.

Key Features

• Fail-secure operation: power off locks the lever, maintaining controlled access
• 24-volt electrified trim compatible with low-voltage access control systems
• Key retracts latch mechanically when electrical power is unavailable
• SFIC prep less core: accepts Small Format Interchangeable Core of choice
• Grade 1 commercial duty rating for high-cycle, high-traffic applications
• Satin Chrome (26D) finish for a clean, corrosion-resistant appearance

Compatibility

Designed for use with SARGENT Surface Vertical Rod and Mortise exit devices in the 8700 and 8900 Series. Configured for Left Hand Reverse (LHR) door handing with the L Lever style.

Installation Notes

Installation should be performed by a licensed locksmith or qualified access control technician familiar with electrified exit device trim and SFIC keying systems. Disconnect and de-energize the access control circuit before working on any wiring connections to the trim. Verify door handing and series compatibility with the existing exit device before mounting. Consult applicable local building and fire codes, including IBC and NFPA 101, to confirm egress hardware requirements for the specific occupancy type.