Sargent 465 26D Grade 2 Single Cylinder Deadbolt

Product Description

The SARGENT 465 26D is a Grade 2 single cylinder deadbolt designed for residential and light commercial door hardware applications. It uses a conventional keyed cylinder on the exterior and a thumb turn on the interior to operate the bolt. The 2-3/4 inch backset fits standard door prep on most interior and exterior doors. The satin chrome finish provides a clean, neutral appearance suited to a wide range of door hardware finishes. Supplied with a wood and metal strike, this deadbolt is non-handed and field reversible, reducing the number of SKUs needed on a typical job.

This deadbolt is appropriate for wood and hollow metal door applications in residential construction and light commercial entry points. The conventional cylinder format accepts standard keyways and is compatible with common key control and rekeying systems used by locksmiths and door hardware contractors. The non-handed, field reversible design allows the installer to configure handing on site without requiring a separate part, making it practical for multi-unit residential work or service calls where door swing direction varies.

Key Features

• Grade 2 ANSI/BHMA security rating for residential and light commercial use
• Single cylinder operation: keyed exterior, thumb turn interior
• 2-3/4 inch backset fits standard door bore preparations
• Non-handed and field reversible for flexible installation
• Includes wood and metal strike for compatibility with common door frames
• Satin chrome (26D) finish for a low-glare, neutral appearance

Compatibility

Designed as an OEM-style Grade 2 deadbolt replacement or new-install unit for standard residential and light commercial doors with a 2-3/4 inch backset door prep.

Installation Notes

Installation is typically performed by a licensed locksmith or door hardware contractor following ANSI/BHMA installation guidelines. Ensure the door and frame are properly aligned and that the bore and latch preparations match the 2-3/4 inch backset before installing. Confirm handing preference and field-reverse the unit on the bench prior to mounting. Strike plate should be properly mortised into the door jamb and secured with fasteners of appropriate length to reach the structural framing.