Sargent 2860-65G05 Kp 26D Grade 2 Cylindrical Lock

Product Description

The SARGENT 2860-65G05 KP 26D is a Grade 2 cylindrical lockset designed for entrance and office door applications. It features a P lever handle and is factory-fitted with an LFIC disposable construction core, allowing temporary keying during the construction phase before the permanent large-format interchangeable core is installed. The finish is Satin Chrome (26D), which provides a clean, low-glare appearance suited to commercial interiors. The lockset is non-handed, meaning it installs on doors swinging in either direction without modification. Licensed locksmiths and commercial door hardware installers are the primary trade for this product.

This lockset is intended for commercial and light commercial interior or exterior entrance and office doors where controlled access is required. The LFIC core format supports master key systems commonly used in office buildings, schools, healthcare facilities, and municipal properties. The disposable construction core ships installed, allowing the building to remain secured during construction while the permanent core is ordered and keyed separately to the facility's master key system.

Key Features

• Grade 2 cylindrical lock suitable for entrance and office function applications
• P lever trim provides ADA-compatible lever operation
• LFIC disposable construction core ships installed for immediate use during construction
• Accepts large-format interchangeable core for permanent keying to a master key system
• Satin Chrome (26D) finish for corrosion resistance and professional appearance
• Non-handed design installs on left-hand or right-hand swing doors without modification

Compatibility

Designed as an OEM-style cylindrical lockset for commercial entrance and office door applications using large-format interchangeable core (LFIC) keying systems.

Installation Notes

Installation should be performed by a licensed locksmith or qualified commercial door hardware technician familiar with cylindrical lockset prep standards. Verify the door is bored to the correct cross-bore and edge-bore dimensions before installation. Remove all building power or access control wiring from the door circuit if an electrified function is present before servicing hardware. The disposable construction core must be removed and replaced with the permanent LFIC core before the facility is occupied and the master key system is activated.