Sandvik Coromant 7582604 Profiling Insert Carbide 1125

Product Description

The SANDVIK COROMANT 7582604 is a carbide profiling insert from the CoroCut 1-2 series, designed for profiling and turning operations on CNC lathes and turning centers. It carries manufacturer grade 1125 with a TiAlN PVD coating applied at a positive rake angle, which supports controlled cutting action and extended edge life in demanding applications. The insert geometry follows style L123H1 with a left-hand orientation, a 0.0591-inch inscribed circle, and a maximum depth of cut of 0.0197 inches. A 0.0296-inch corner radius and RO chipbreaker geometry complete the cutting profile. This insert is installed by machinists and CNC tooling technicians in production and job-shop environments.

The 7582604 is suited for turning and profiling operations on steel, stainless steel, superalloys, and titanium workpieces, corresponding to ISO material groups P, M, and S. The CoroCut 1-2 platform is commonly used for grooving and profiling passes requiring precise contour control. The single cutting edge and rectangular shape make this insert appropriate for finish-profile passes and contour-following operations where edge geometry consistency is critical.

Key Features

• Carbide substrate with TiAlN PVD coating for wear resistance on steel, stainless steel, and titanium
• Manufacturer grade 1125 engineered for ISO P, M, and S workpiece material groups
• Left-hand insert orientation for specific toolholder and application pairing
• RO chipbreaker geometry with positive rake angle for controlled chip formation
• Maximum depth of cut of 0.0197 inches suitable for finish profiling passes
• CoroCut 1-2 series platform with ISO code L123H1-0150-RO 1125

Compatibility

Designed for use in CoroCut 1-2 series toolholders accepting L123H1 style inserts with size code 0150 in a left-hand configuration. Compatible toolholder selection should be verified against the ISO code L123H1-0150-RO 1125.

Installation Notes

Installation is performed by qualified machinists or CNC tooling technicians. The machine spindle must be fully stopped and all stored energy released before indexing or replacing inserts. Use the appropriate torque wrench and clamping hardware specified by the toolholder manufacturer to secure the insert clamp. Inspect the insert seat and clamp for damage or debris before seating a new insert.