Sandvik Coromant 6075368 Grooving Insert 6mm Corocut 1-2

Product Description

The SANDVIK COROMANT 6075368 is a solid carbide grooving insert in the CoroCut 1-2 series, designed for external grooving, parting, and profiling operations on CNC lathes and turning centers. It carries a TiAlN2 coating applied via PVD process, providing wear resistance and thermal stability during high-speed cuts. The insert features a 6 mm cutting width, a maximum depth of cut of 24.4 mm, and a neutral hand orientation. The GF chip breaker geometry supports controlled chip formation in a wide range of workpiece materials. Manufacturer grade 1105 is paired with this geometry to deliver consistent performance in medium to finishing cuts. Licensed machinists and CNC operators install this insert as a direct replacement in compatible CoroCut 1-2 toolholders.

This insert is suited for use on CNC turning centers and lathes in both production and job-shop environments. It handles external grooving and parting applications in ferrous and non-ferrous materials where a 6 mm groove width is required. The neutral rake and GF chip breaker make it appropriate for a range of cutting conditions, from light finishing passes to moderate stock removal within the rated depth range. The insert size designation is K and the ISO code is N123K2-0600-0002-GF 1105, which can be used to cross-reference compatible toolholders in the CoroCut 1-2 system.

Key Features

• Solid carbide substrate with PVD-applied TiAlN2 coating for wear resistance and extended tool life
• 6 mm cutting width with a maximum depth of cut of 24.4 mm, covering the 20 mm and above depth range
• GF chip breaker geometry for controlled chip formation in grooving and parting operations
• Neutral hand orientation and neutral rake angle of 7 degrees for versatile setup in right- or left-hand configurations
• Corner radius of 0.20 mm (0.0079 inches) for precise groove floor geometry
• Multi-use insert compatible with CoroCut 1-2 toolholder system; ISO code N123K2-0600-0002-GF 1105

Compatibility

Designed for use in SANDVIK COROMANT CoroCut 1-2 series toolholders that accept insert size K with a 6 mm seat width. The ISO catalog number N123K2-0600-0002-GF 1105 should be used to confirm toolholder compatibility before installation.

Installation Notes

Installation is performed by a qualified CNC machinist or toolroom technician. The machine spindle must be stopped and the turret fully indexed and locked before seating or removing the insert. Use the appropriate SANDVIK COROMANT torx or hex key as specified by the toolholder documentation — do not overtighten the clamping screw. Inspect the insert seat and clamping components for chips or debris before seating a new insert to ensure proper contact and repeatability.