Sandvik Coromant 5922172 Milling Insert Solid Carbide

Product Description

The SANDVIK COROMANT 5922172 is a solid carbide milling insert in a square shape designed for use with the Sandvik Coromant 490 cutter series. Carrying manufacturer grade H13A and an uncoated bright finish, this insert is built for cutting non-ferrous metals, superalloys, and titanium where a sharp, positive rake geometry is required. It features four usable cutting edges and a corner radius of 0.80 mm, with an inscribed circle of 8.50 mm and a thickness of 3.30 mm. The ML chip breaker geometry supports light to medium cutting conditions. Licensed tradespeople and CNC machinists install this insert in milling operations where tool life and edge consistency are priorities.

This insert is suited for milling applications in aerospace, precision machining, and industrial manufacturing environments where non-ferrous metals and superalloys including titanium are the primary workpiece materials. It is designed for use specifically with the Sandvik Coromant 490 cutter series and follows the ANSI and ISO designations 490R-08T308E-ML H13A. The positive rake angle of 32 degrees promotes free cutting action and reduced cutting forces, making it well matched to lightweight alloy and exotic metal stock. This is a single-sided, right-hand insert held in place by screw-clamping.

Key Features

• Solid carbide construction with bright uncoated finish for sharp, low-friction cutting in non-ferrous and superalloy materials
• Four cutting edges per insert for extended usable life per unit
• ML chip breaker geometry optimized for light to medium milling passes
• Positive rake angle of 32 degrees reduces cutting forces on difficult materials including titanium
• Corner radius of 0.80 mm for controlled edge engagement and surface finish
• Maximum depth of cut of 5.50 mm supports a range of axial engagement scenarios

Compatibility

Designed for use with the Sandvik Coromant 490 cutter series. ANSI and ISO designation: 490R-08T308E-ML H13A. Intended for machining non-ferrous metals, superalloys, and titanium workpieces.

Installation Notes

This insert is installed by a machinist or CNC tooling technician using the screw-clamping method standard to the 490 cutter body. Power down and lock out the machine spindle before changing inserts. Inspect the insert pocket and clamping screw for wear or debris before seating the new insert. Follow the cutter manufacturer torque guidelines printed in the toolholder documentation for the clamping screw.