Sandvik Coromant 5764333 Modular Turning Profiling Head

Product Description

The SANDVIK COROMANT 5764333 is a modular turning profiling head designed for internal turning operations on CNC lathes and turning centers. Part of the CoroTurn 107 series, this right-hand head features a size 25 head connection, a head length projection of 0.787 inches (20 mm), and a neck diameter of 0.984 inches (25 mm). It accepts CCMT 09T308 inserts secured by a clamp and screw holding method. Through-coolant capability is built in, supporting longer tool life and chip control in bore finishing and profiling applications. This head is installed by machinists and CNC tooling specialists working with modular boring and turning systems.

This profiling head is suited for internal turning, boring, and contour profiling in precision machining environments including aerospace, automotive, and general metalworking. The minimum hole diameter it can operate in is 1.260 inches (32 mm), with a maximum hole depth of 0.787 inches (20 mm). The center-to-cutting-edge distance is 0.669 inches (17 mm). It connects to size 25 modular tooling interfaces and is compatible with CoroTurn 107 system toolholders and boring bars that accept size 25 head connections.

Key Features

• CoroTurn 107 series modular system with size 25 head connection interface
• Accepts CCMT 09T308 inserts via clamp and screw holding method
• Through-coolant design for improved chip evacuation and insert life
• Right-hand cutting direction for standard internal turning and profiling
• Minimum bore diameter of 1.260 inches (32 mm) with 0.787-inch (20 mm) head length projection
• Radial rake angle of -6 degrees for controlled cutting geometry

Compatibility

Compatible with CCMT 09T308 inserts and designed for use with CoroTurn 107 series modular toolholders and boring bar shanks that accept a size 25 head connection.

Installation Notes

Installation is performed by qualified machinists or CNC tooling technicians. Ensure the machine spindle is fully stopped and locked out before changing or seating the modular head. Verify the head connection interface is clean and free of chips or burrs before torquing the coupling. Confirm coolant passages are unobstructed before resuming machining operations.