Sandvik Coromant 5764247 Modular Turning Head Size 40

Product Description

The SANDVIK COROMANT 5764247 is a modular turning profiling head designed for internal left-hand turning operations. Part of the T-Max P series, this head features a system size of 40, a head length projection of 32 mm (1.26 inches), and a neck diameter of 40 mm (1.57 inches). The center-to-cutting-edge distance is 27 mm (1.063 inches). It uses DNMG 150608 inserts secured by a wedge holding method and includes through-coolant capability to extend insert life and manage heat during deep internal profiling passes. This head is typically installed by CNC machinists and tooling specialists in production turning environments.

This profiling head is suited for internal turning and profiling applications where precise bore geometry and controlled chip evacuation are required. The left-hand cutting direction makes it appropriate for specific spindle rotation setups and bore entry configurations. The minimum hole diameter for this head is 50 mm (1.969 inches), and the maximum hole depth matches the head length projection at 32 mm (1.26 inches), making it relevant for shallow-to-moderate internal profiling work in ferrous and non-ferrous materials.

Key Features

• System size 40 modular interface with head connection size 40 for secure, repeatable mounting
• Through-coolant design directs fluid to the cutting zone, reducing heat and improving chip control
• Wedge insert holding method for rigid clamping of DNMG 150608 inserts
• Left-hand cutting direction for internal bore profiling setups
• Axial rake angle of -6 degrees and radial rake angle of -12 degrees for controlled cutting geometry
• Minimum hole diameter of 50 mm (1.969 inches) for appropriate bore clearance

Compatibility

Compatible with DNMG 150608 inserts. Designed for use within the T-Max P modular turning system at system size 40 and head connection size 40.

Installation Notes

Installation should be performed by qualified CNC tooling technicians following the machine tool manufacturer guidelines. Ensure the machine spindle is fully stopped and all motion is locked out before mounting or removing the head. Verify torque specifications per the T-Max P system documentation when securing the modular connection. Confirm through-coolant lines are properly connected and tested before resuming cutting operations.