Sandvik Coromant 5760284 Hydraulic Chuck Sleeve

Product Description

The SANDVIK COROMANT 5760284 is a hydraulic chuck sleeve designed to adapt tool shanks within hydraulic chuck toolholding systems. It provides a precision interface between the cutting tool and the chuck body, transmitting clamping force evenly around the tool shank for accurate, vibration-damped cutting. The sleeve features through-coolant capability, allowing coolant delivery directly to the cutting zone. Key dimensions are a 10 mm inside diameter, 12 mm outside diameter, 16 mm head diameter, and a 40 mm length under head. Rated to 80 bar operating pressure, it is constructed from steel for durability under high-cycle machining conditions. Installation is performed by machinists and toolroom technicians working with hydraulic chuck toolholding setups.

This sleeve is used in CNC machining centers and turning centers where hydraulic chuck toolholders require a reduction sleeve to accept smaller-shank cutting tools. Through-coolant capability makes it well suited for deep-hole drilling, reaming, and other operations where chip evacuation and tool-tip cooling are critical. The 10 mm bore accommodates standard 10 mm shank tools, and the 40 mm length under head provides appropriate projection for typical toolholding assemblies. This is a replacement or spare component stocked for production and maintenance toolrooms.

Key Features

• 10 mm inside diameter accepts standard 10 mm shank cutting tools
• Through-coolant design channels coolant directly to the cutting zone
• 80 bar rated operating pressure for high-force hydraulic clamping applications
• Steel construction for wear resistance and dimensional stability
• 40 mm length under head suits typical hydraulic chuck projection requirements
• 16 mm head diameter provides positive seating within the chuck body

Compatibility

Designed as a replacement or accessory sleeve for hydraulic chuck toolholding systems requiring a 10 mm ID sleeve with a 12 mm OD and 16 mm head diameter. Verify chuck body bore and sleeve seating dimensions against your toolholder specifications before installation.

Installation Notes

Installation is performed by qualified toolroom technicians or machinists. Ensure the hydraulic chuck is fully depressurized before inserting or removing any sleeve. Clean all mating surfaces and inspect for burrs or damage that could affect seating accuracy. Follow the machine tool and toolholder manufacturer documentation for clamping pressure procedures and torque requirements on any associated fasteners.