Sandvik Coromant 5756362 Turning Insert WNMG332MM 1115

Product Description

The SANDVIK COROMANT 5756362 is a WNMG332MM 1115-grade carbide turning insert engineered for precision metal-cutting in CNC turning applications. Part of the T-Max P series, this insert features a dual-layer PVD coating of TiAlN and AlCr2O3 that provides heat and wear resistance during demanding cutting operations. The trigon (W) insert shape offers an 80-degree included angle with six usable cutting edges per insert. The 0.80 mm corner radius (1/32 inch) and MM chip breaker geometry are optimized for controlled chip formation in difficult-to-machine materials. Licensed machinists and CNC operators handling stainless steel and superalloy components will find this insert well-suited to finishing and semi-finishing passes.

This insert is designed primarily for turning stainless steel (ISO material code M) with secondary suitability for superalloys and titanium (ISO material code S). It fits standard WNMG toolholders and is a natural-hand insert, compatible with both clamp and pin holding methods. The ISO designation is WNMG 06 04 08-MM 1115, which helps confirm fitment with existing toolholder inventories running the T-Max P series. Typical applications include external and internal turning on CNC lathes in industrial machining, aerospace component work, and precision manufacturing environments.

Key Features

• PVD-coated with TiAlN and AlCr2O3 layers for heat resistance and extended tool life
• Six cutting edges per insert reduce per-edge tooling cost
MM chip breaker geometry promotes reliable chip control in stainless and superalloy cuts
• 80-degree trigon shape (insert shape code W) provides strong cutting edge geometry
• Neutral hand orientation works with a wide range of standard WNMG toolholders
• Clamp and pin holding method compatibility adds setup flexibility

Compatibility

Designed for use in toolholders accepting WNMG-style inserts per ISO designation WNMG 06 04 08-MM 1115; compatible with SANDVIK COROMANT T-Max P series toolholders using clamp or pin holding methods. Primary workpiece material is stainless steel; secondary applications include superalloys and titanium.

Installation Notes

Insert replacement and indexing should be performed by a qualified CNC machinist or toolroom technician with the machine powered down and the spindle locked. Use the appropriate torque wrench and manufacturer-specified clamp hardware when seating the insert to avoid cracking the carbide substrate. Inspect the toolholder pocket and seating surface for chips or debris before installing a new insert. Always verify ISO insert designation and corner radius against the programmed tool-nose compensation value before resuming cuts.