Sandvik Coromant 5754005 TNMG331-PF 5015 Turning Insert

Product Description

The SANDVIK COROMANT 5754005 is a solid carbide turning insert in the TNMG331-PF geometry, part of the T-Max P series. It features a 60-degree triangular shape with a neutral hand orientation and an uncoated bright finish, making it suitable for operations where coating is not required or preferred. The insert measures 0.6338 inches in length with a 3/8-inch inscribed circle and a 1/64-inch corner radius. With six cutting edges per insert, it delivers extended tool life per piece. This insert is installed by machinists and CNC lathe operators working in production turning environments.

The SANDVIK COROMANT 5754005 is designed for turning applications on steel as the primary workpiece material and cast iron as a secondary workpiece material. The PF chip breaker geometry is suited for finishing operations, providing controlled chip formation at lighter depths of cut and feed rates. The T-Max P series is a widely used platform in external and internal turning on CNC lathes in both job shop and production environments. The clamp and pin holding method provides secure insert seating for consistent performance.

Key Features

• TNMG331-PF geometry with 60-degree triangle shape and neutral hand orientation
• Solid carbide, uncoated bright finish — grade 5015
• 6 cutting edges per insert for extended tool life per piece
• 3/8-inch inscribed circle with 1/64-inch corner radius for finishing work
• PF chip breaker optimized for steel finishing operations
• Clamp and pin holding method for secure, repeatable seating

Compatibility

Designed for use in T-Max P series toolholders compatible with TNMG-style inserts. ISO code TNMG 16 04 04-PF 5015. Verify toolholder specifications for clamp and pin retention compatibility before installation.

Installation Notes

Insert replacement should be performed by a qualified machinist with the machine powered down and spindle locked. Use the appropriate torque wrench and clamp hardware specified by the toolholder manufacturer — do not overtighten the clamping screw. Inspect the toolholder pocket for wear or debris before seating a new insert. Follow all applicable shop safety procedures and machine guarding requirements during insert changes.