Sandvik Coromant 5747652 Milling Insert H10 Solid Carbide

Product Description

The SANDVIK COROMANT 5747652 is a solid carbide milling insert designed for use in R590 series face and shoulder milling cutter bodies. Carrying manufacturer grade H10 and material grade N10, this uncoated bright-finish insert is engineered for cutting cast iron and non-ferrous metals where a sharp, free-cutting edge is required. The parallelogram insert shape with a positive 25-degree rake angle and corner-rounded cutting edge style reduces cutting forces and promotes clean chip evacuation. Two cutting edges are available per insert, and the screw-in holding method locks the insert securely in the cutter pocket. Licensed machinists and CNC tooling technicians working in production or job-shop environments are the primary installers.

This insert fits R590 series milling cutter bodies and is suited for face milling, shoulder milling, and pocketing operations on cast iron and non-ferrous metal workpieces. With a maximum depth of cut of 10.00 mm (0.3937 inches) and a right-hand orientation, it is appropriate for both roughing and semi-finishing passes in horizontal and vertical machining centers. The insert size code 110504 and ANSI/ISO designation R590-110504H-NL H10 identify the exact seat geometry required in a compatible R590 tool body. Applications span automotive, general engineering, and light-alloy machining where workpiece surface finish and tool life consistency are priorities.

Key Features

• H10 solid carbide, uncoated (bright finish) for sharp-edge performance on cast iron and non-ferrous metals
• Positive 25-degree rake angle with corner-rounded cutting edge reduces cutting forces and chatter
• Corner radius of 0.40 mm (0.0157 inches) for controlled edge strength without excessive rubbing
• Two cutting edges per insert extend usable tool life per piece
• Screw-in insert holding method provides rigid, repeatable seating in R590 cutter pockets
• Conforms to both ANSI and ISO standards; ANSI/ISO code R590-110504H-NL H10

Compatibility

Designed for use with Sandvik Coromant R590 series milling cutter bodies that accept insert size code 110504 with an NL chip breaker geometry and right-hand cutting orientation.

Installation Notes

Insert replacement should be performed by a qualified machinist or CNC tooling technician with the machine spindle fully stopped and the machine locked out per facility lockout/tagout procedures. Use the appropriate Torx or hex key as specified by the R590 cutter body documentation to achieve correct screw clamp force — do not overtighten, as this can fracture the carbide insert. Inspect the insert pocket seat and clamping screw for wear or debris before seating a new insert. Verify insert orientation matches the right-hand designation before resuming cutting operations.