Sandvik Coromant 5747607 Milling Insert R590 Carbide

Product Description

The SANDVIK COROMANT 5747607 is a solid carbide milling insert designed for use in R590-series face milling and shoulder milling cutter bodies. Coated with TiAlN via a PVD process, this insert carries manufacturer grade 1020 and material grade K05, making it particularly suited for cutting cast iron workpieces. It features a parallelogram shape with a positive rake angle of 25 degrees, a corner-rounded cutting edge style, and two cutting edges per insert. The insert measures 0.4528 inches in inscribed circle diameter and 0.1969 inches thick, with a maximum depth of cut of 0.3937 inches. Licensed trade machinists and CNC operators install this insert in production and job-shop environments.

This insert is intended for ferrous machining operations, primarily in cast iron applications at the K material group designation. It fits R590-series cutter bodies and is identified by ANSI and ISO code R590-110508H-KL 1020. The KL chip breaker geometry supports positive cutting action and chip control during face and shoulder milling. Right-hand cutting orientation makes it compatible with standard right-hand cutter configurations. It is a single-sided insert held in place by a screw-clamp method, consistent with R590 toolholder designs.

Key Features

• Solid carbide substrate with PVD TiAlN coating for wear resistance in cast iron cutting
• Manufacturer grade 1020 and material grade K05 rated for cast iron (K-group) applications
• Positive 25-degree rake angle with corner-rounded cutting edge reduces cutting forces
• KL chip breaker geometry for effective chip control in ferrous milling
• Two cutting edges per insert; single-sided design with screw-clamp holding method
• Maximum depth of cut of 0.3937 inches (10.00 mm) supports productive material removal

Compatibility

Designed for use in R590-series milling cutter bodies as identified by ANSI and ISO code R590-110508H-KL 1020. Insert size code 110508 and the KL chip breaker designation must match the intended cutter body specification before installation.

Installation Notes

Installation is performed by qualified machinists or CNC tooling technicians. Ensure the machine spindle is fully stopped and locked out before changing inserts. Seat the insert fully against the pocket locating surfaces before torquing the clamping screw; refer to the cutter body manufacturer documentation for the correct screw torque specification. Inspect the insert pocket for debris or damage before seating a new insert to prevent premature edge failure.