Sandvik Coromant 5737626 Grooving Insert 0.25in H13A

Product Description

The SANDVIK COROMANT 5737626 is a solid carbide grooving insert designed for parting and grooving operations on CNC lathes and turning centers. It carries the ISO designation N151.2-A250-60-4G H13A and belongs to the T-Max Q-Cut series. The insert features a 0.25 inch cutting width, a neutral hand orientation, and an uncoated bright finish in manufacturer grade H13A. A 7-degree rake angle and the 4G chip breaker geometry work together to promote controlled chip evacuation during interrupted or continuous grooving cuts. This insert is used by machinists and CNC operators in production and job-shop environments.

The 5737626 is suited for grooving, parting-off, and profiling applications on a range of workpiece materials where an uncoated solid carbide grade is appropriate. The neutral hand configuration allows use in standard right-hand toolholders within the T-Max Q-Cut system. Insert size 60 and seat size 60 must match the corresponding toolholder pocket to ensure proper seating and clamping. The multi-use designation indicates compatibility with grooving, turning, and profiling within the same insert family.

Key Features

• 0.25 inch cutting width with a 6.35 mm equivalent for precise groove sizing
• Uncoated bright H13A solid carbide grade optimized for specific material groups
• Neutral hand orientation for use in standard T-Max Q-Cut toolholders
• 4G chip breaker geometry promotes controlled chip formation and evacuation
• 7-degree rake angle reduces cutting forces during grooving operations
• Multi-use insert compatible with grooving, turning, and profiling applications

Compatibility

Designed for use with SANDVIK COROMANT T-Max Q-Cut series toolholders accepting insert size 60 and seat size 60 with a neutral hand configuration. ISO code N151.2-A250-60-4G H13A identifies the exact insert-to-holder match required.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator with the machine fully powered down and in a safe, locked-out state. Ensure the toolholder pocket and clamping screw are clean and free of chips before seating the insert. Use the manufacturer-specified clamping torque for the T-Max Q-Cut system as listed in the SANDVIK COROMANT tooling catalog. Do not exceed the cutting parameters recommended for grade H13A, as uncoated carbide inserts are sensitive to thermal shock from interrupted coolant application.