Sandvik Coromant 5736726 Grooving Insert T-max Q-cut Grade 235

Product Description

The SANDVIK COROMANT 5736726 is a solid carbide grooving insert in the T-Max Q-Cut series, designed for precision external grooving and parting operations on CNC lathes and turning centers. It carries a CVD-applied TiCN/TiN coating over a Grade 235 carbide substrate, delivering wear resistance and thermal stability in steel and cast iron applications. The cutting width measures 0.094 inches (3/32 inch), the corner radius is 0.0075 inches, and the insert features a neutral hand orientation. The 4G chip breaker geometry promotes controlled chip evacuation during grooving passes. Installation and application are suited to machinists and tooling technicians working in production or job-shop turning environments.

This insert is sized for Insert Seat Size 25 and carries the ISO designation N151.2-A094-25-4G 235. It is intended for use in compatible T-Max Q-Cut grooving toolholders that accept the N151.2 insert style at Seat Size 25. The neutral rake and 7-degree rake angle make it applicable across a range of workpiece materials where consistent groove geometry and surface finish are required. The multi-use designation indicates suitability for both grooving and parting-off operations on the same setup.

Key Features

• Solid carbide construction with CVD TiCN/TiN coating for wear resistance in steel and cast iron
• 0.094 inch cutting width with 3/32 inch nominal designation for precise groove sizing
• 4G chip breaker geometry for controlled chip formation and evacuation
• Neutral hand orientation and 7-degree rake angle for versatile application
• Corner radius of 0.0075 inches (0.19 mm) for groove root geometry control
• Multi-use rated for both grooving and parting-off operations

Compatibility

Designed for use in T-Max Q-Cut grooving toolholders and insert seats accepting the N151.2 insert style at Insert Seat Size 25. ISO code N151.2-A094-25-4G 235 confirms direct fitment reference.

Installation Notes

Installation is performed by machinists or tooling setup technicians on CNC or manual turning equipment. Ensure the machine spindle is fully stopped and the toolholder is secured before seating or removing the insert. Use the appropriate torx or clamping key as specified by the toolholder manufacturer — do not substitute fasteners. Verify insert seating and clamping force before resuming cutting operations.