Sandvik Coromant 5736023 Cutoff Insert 3mm Corocut 1-2

Product Description

The SANDVIK COROMANT 5736023 is a solid carbide cutoff insert engineered for parting and grooving operations on CNC lathes and turning centers. Manufactured to the N123G2 insert style with a 3.00 mm (0.1181 inch) cutting width, this insert carries manufacturer grade 1145 with a PVD-applied TiAlN and AlCr2O3 coating for wear resistance and thermal stability. The neutral lead angle and CR chipbreaker geometry promote controlled chip flow during cutoff passes. A 7-degree relief angle and 0.30 mm corner radius round out the cutting geometry. Machinists and CNC operators working in production and job-shop environments will find this insert suited to consistent, repeatable parting cycles.

This insert is part of the CoroCut 1-2 series, designed for radial grooving and cutoff operations on turning machines. It fits G-size insert seats using a clamp-style holding method. Typical applications include cutoff of bar stock, shallow grooving, and face grooving on small to medium diameter workpieces. It is sold individually with a minimum order quantity of 10 units per purchase. Overall insert length is 19.78 mm (0.7787 inch), with a maximum depth of cut of 18.80 mm (0.7402 inch).

Key Features

• Solid carbide construction with PVD coating process for extended tool life
• TiAlN and AlCr2O3 coating provides heat and wear resistance in dry or light-coolant conditions
• 3.00 mm cutting width with neutral hand suits standard radial cutoff toolholders
• CR chipbreaker geometry controls chip formation during parting operations
• 0.30 mm corner radius reduces edge stress at the start and finish of the cut
• 7-degree relief angle minimizes rubbing on the cut face

Compatibility

Designed as an OEM-style replacement insert for CoroCut 1-2 series G-seat clamp-style toolholders accepting N123G2 insert style with a 3.00 mm cutting width.

Installation Notes

This insert is installed by CNC machinists and toolroom technicians. Power down and lock out the machine spindle before indexing or replacing the insert. Seat the insert fully into the G-size pocket and torque the clamp screw according to the toolholder manufacturer specification. Inspect the insert seat and clamp for chips or damage before securing the insert to ensure proper seating and safe operation.