Sandvik Coromant 5735604 Grooving Insert 3mm Carbide

Product Description

The SANDVIK COROMANT 5735604 is a solid carbide grooving insert designed for the CoroCut 1-2 indexable grooving system. It features a 3.00 mm (0.1181 inch) cutting width and a maximum depth of cut of 18.70 mm (0.7360 inch), making it suitable for medium-depth grooving operations on CNC lathes and turning centers. The insert carries a multilayer MT-CVD coating of TiCN, Al2O3, and TiN, which provides wear resistance and thermal stability during continuous and interrupted cuts. It is installed by machinists and CNC operators in production turning environments.

This insert is intended for grooving and parting applications on lathes and turning centers where the CoroCut 1-2 tooling system is in use. The neutral hand orientation makes it compatible with standard straight-shank and cartridge-style CoroCut 1-2 holders. With a cutting height of 4.30 mm and a corner radius of 1.50 mm (0.0591 inch), it handles a maximum depth of cut range of 10.00 mm to 20.00 mm, covering a broad range of groove depths in steel, stainless, and similar workpiece materials.

Key Features

• Solid carbide substrate with MT-CVD TiCN, Al2O3, and TiN multilayer coating for extended tool life
• 3.00 mm cutting width with a maximum depth of cut of 18.70 mm
• Positive rake geometry with RO chip breaker for controlled chip evacuation
• Neutral hand insert compatible with standard CoroCut 1-2 holders
• Corner radius of 1.50 mm for consistent groove geometry and surface finish
• Multi-use insert rated for a depth of cut range from 10.00 mm to 20.00 mm

Compatibility

Designed for use with SANDVIK COROMANT CoroCut 1-2 series grooving and parting toolholders. ISO code N123F2-0300-RO S05F. Insert seat size F, insert size F2, insert style N123x2.

Installation Notes

Installation is performed by a qualified machinist or CNC setup technician. The machine spindle must be stopped and all motion fully halted before indexing or replacing the insert. Use the appropriate Torx or hex key as specified by the toolholder manufacturer to secure the clamping screw to the correct torque — do not overtighten or use damaged clamping hardware. Verify insert seating fully in the pocket before resuming cuts, and confirm correct tool offset values in the CNC control after any insert change.