Sandvik Coromant 5735414 Grooving Insert Corocut Xs

Product Description

The SANDVIK COROMANT 5735414 is a solid carbide grooving insert in the CoroCut XS series, designed for small-part grooving, parting, and turning operations on CNC lathes and Swiss-type machines. This left-hand insert carries a PVD-applied TiAlN/TiN coating for wear resistance and thermal stability at the cutting edge. It features a 1.5 mm cutting width and a maximum depth of cut of 3.70 mm, making it well suited for precision grooving in tight clearance zones. The MAG chip breaker geometry with a neutral rake angle of 6 degrees promotes controlled chip formation in both ferrous and non-ferrous workpiece materials. Installation and tool selection are typically handled by CNC machinists and tooling specialists.

This insert is intended for use in small-diameter grooving and face-grooving applications where tight tolerances and consistent chip control are required. The CoroCut XS series targets Swiss-type lathes, multi-spindle machines, and small-part turning centers where radial space is limited. The ISO code for this insert is MAGL 3 150 1025, and it carries an insert seat size of 3. With a cutting height of 3.17 mm and an overall length of approximately 0.47 inches, it fits into the compact toolholders designed for the CoroCut XS platform. It is sold individually with a minimum order quantity of 5 units.

Key Features

• Solid carbide construction with PVD-applied TiAlN/TiN coating for extended edge life
• 1.5 mm cutting width with a maximum depth of cut of 3.70 mm
• Left-hand orientation with neutral rake and MAG chip breaker geometry
• Corner radius of 0.05 mm for precision edge definition on small-diameter features
• Grade 1025 substrate suited for a range of turning and grooving applications
• Multi-use capability across grooving, parting, and small-part turning operations

Compatibility

Designed for use with SANDVIK COROMANT CoroCut XS series toolholders accepting insert seat size 3 and a 1.5 mm cutting width. ISO code MAGL 3 150 1025 identifies the compatible seat and geometry. Verify toolholder pocket specifications before ordering.

Installation Notes

Insert seating and clamping should be performed by a qualified CNC machinist or tooling technician following the toolholder manufacturer's torque and clamping procedures. Power down and lock out the machine spindle before changing inserts. Do not exceed the maximum depth of cut specified for this insert, and confirm that coolant delivery is appropriate for the coating type and workpiece material. Inspect the insert seat for chips or debris before installation to ensure proper seating and edge alignment.