Sandvik Coromant 5735286 Turning Insert MABR3005 1025

Product Description

The SANDVIK COROMANT 5735286 is a solid carbide turning insert designed for precision parting and grooving operations in metalworking applications. Part of the CoroCut XS series, this insert carries manufacturer grade 1025 and features a PVD-applied dual coating of TiAlN and TiN for improved wear resistance and thermal stability at the cutting edge. The insert uses an MABR style geometry with a full radius profile, a 0.0020 inch (0.05 mm) corner radius, and a right-hand cutting orientation. Holding is accomplished via screw clamping. This insert is intended for use by machinists and toolroom professionals working on small-part turning and cut-off operations.

The 5735286 fits into the CoroCut XS tooling system and is suited for small-diameter parting, grooving, and turning on CNC lathes and turning centers. Its compact 3.17 mm inscribed circle diameter makes it appropriate for tight-clearance work on small components. The irregular insert shape (ISO shape code M) and 6-degree relief angle support positive cutting action in both production and job-shop environments. This insert is sold individually but requires a minimum order quantity of 5 units per transaction.

Key Features

• Solid carbide substrate with PVD TiAlN and TiN dual coating for extended tool life
• Full radius geometry with 0.0020 inch (0.05 mm) corner radius for consistent groove profiles
• Right-hand cutting orientation with screw-clamp insert holding method
• 6-degree relief angle supports positive cutting action and reduced cutting forces
• ISO code MABR 3 005 1025 for straightforward cross-referencing and replacement ordering
• Multi-use turning application per manufacturer specification

Compatibility

Designed for use with SANDVIK COROMANT CoroCut XS series toolholders and systems that accept the MABR 3005 insert size. Confirm holder acceptance of a 0.1250 inch inscribed circle diameter and screw-clamp retention before installation.

Installation Notes

Installation is performed by qualified machinists or toolroom technicians. Power down and lock out the machine spindle before changing inserts. Use the correct Torx or hex key specified by the toolholder manufacturer to seat the clamping screw — do not overtighten by feel alone; follow the toolholder documentation. Inspect the insert pocket and clamping screw for wear or debris before seating a new insert.