Sandvik Coromant 5734127 Cutoff Insert 4mm Corocut 1-2

Product Description

The SANDVIK COROMANT 5734127 is a solid carbide cutoff insert designed for parting and grooving operations in metalworking applications. Built to CoroCut 1-2 series specifications, it delivers a 4.00 mm (0.1575 inch) cutting width with a left-hand lead angle of 0 degrees and a relief angle of 7 degrees. The insert features a TiAlN coating applied via PVD process, which extends tool life in demanding cutting conditions. A corner radius of 0.30 mm (0.0118 inch) and a CR chipbreaker geometry help manage chip flow and reduce cutting forces. Licensed machinists and toolroom technicians working with CNC lathes and turning centers will find this insert suited to precision parting work.

This insert is intended for use in parting and grooving applications on CNC turning centers, lathes, and similar machine tool setups. The left-hand orientation and H-size insert seat make it appropriate for specific toolholder configurations within the CoroCut 1-2 system. With a maximum depth of cut of 23.70 mm (0.9331 inch) and an overall length of 24.95 mm (0.9823 inch), it covers a broad range of workpiece diameters in both production and job-shop environments. This insert is sold individually with a minimum order quantity of 10 units.

Key Features

• Solid carbide construction with TiAlN PVD coating for extended wear resistance
• 4.00 mm cutting width with 0-degree left-hand lead angle
• CR chipbreaker geometry for controlled chip evacuation
• Corner radius of 0.30 mm for consistent edge definition
• Maximum depth of cut of 23.70 mm suitable for a wide range of parting applications
• H-size insert seat with clamp holding method for secure toolholder fit

Compatibility

Designed for use with CoroCut 1-2 series toolholders requiring an H insert seat size and left-hand insert orientation. Catalog reference: L123H2-0400-0503-CR 1125.

Installation Notes

Installation should be performed by a qualified machinist or toolroom technician with the machine fully powered down and in a locked-out state. Verify that the toolholder seat is clean and free of debris before seating the insert. Use the appropriate clamping torque specified by the toolholder manufacturer for the H-seat clamp style. Do not exceed the maximum depth of cut rating for the insert during operation.