Sandvik Coromant 5733334 Carbide Cutoff Insert Corocut Xs

Product Description

The SANDVIK COROMANT 5733334 is a carbide cutoff and grooving insert in the CoroCut XS series, designed for precision parting, grooving, and turning operations on CNC lathes and turning centers. It features a 0.70 mm (0.0276 inch) cutting width with a left-hand lead angle orientation and a 0-degree lead angle, making it suited for tight-clearance cutoff work. The insert is manufactured in grade 1025 carbide with a PVD-applied TiN/TiAlN coating for wear resistance and thermal stability. Screw-clamping secures the insert in compatible CoroCut XS toolholders. Machinists and CNC operators working in job shop and production environments install this insert.

This insert is intended for grooving, parting, and turning applications across a range of workpiece materials. The MACL insert style and left-hand designation make it appropriate for specific approach directions on Swiss-type machines, small-part lathes, and conventional CNC turning centers where minimal cutting width and precise depth control are required. Maximum depth of cut is 4.30 mm (0.1693 inch). The MAC chipbreaker geometry supports chip control during shallow grooving passes.

Key Features

• Cutting width of 0.70 mm (0.0276 inch) for fine parting and narrow groove work
• Grade 1025 carbide substrate with PVD TiN/TiAlN coating for extended tool life
• Left-hand lead angle, 0-degree lead angle — MACL insert style
• Relief angle of 6 degrees for clearance in close-tolerance grooving
• MAC chipbreaker geometry aids chip evacuation during grooving passes
• Screw-held mounting for secure, repeatable insert positioning

Compatibility

Designed for use in CoroCut XS series toolholders that accept insert seat size 3 with screw-clamping. Specific compatible toolholder models were not provided in the available product data; verify seat size and insert style MACL against your toolholder documentation before ordering.

Installation Notes

Installation should be performed by a qualified machinist or CNC tooling technician following the machine tool manufacturer safety procedures. Power down and lock out the spindle before changing inserts. Use the correct torx or hex key for the clamping screw and avoid overtightening, which can crack the insert seat. Confirm insert orientation matches the programmed tool path direction before resuming cuts.