Sandvik Coromant 5733330 Cutoff Insert 1.5mm Corocut Xs

Product Description

The SANDVIK COROMANT 5733330 is a solid carbide cutoff and grooving insert designed for precision parting, grooving, and turning operations on CNC lathes and turning centers. Manufactured to the MACL insert style in the CoroCut XS series, it features a 1.5 mm cutting width and a left-hand lead angle orientation with a 0-degree lead angle. The insert carries manufacturer grade 1025 with a PVD-applied TiN/TiAlN coating for wear resistance and thermal stability. A 6-degree relief angle and 0.05 mm corner radius support clean, controlled cuts at tight tolerances. This insert is installed by machinists and CNC tooling technicians in production and job-shop environments.

This insert suits residential and industrial machining applications involving grooving, parting off, and light turning on small-diameter workpieces. The CoroCut XS series is engineered for close-clearance and small-part turning work where compact tooling geometry is required. The MACL chipbreaker geometry and screw-clamping holding method make it well suited for secure, repeatable indexing in high-cycle production runs. Compatible toolholders and blade systems designed for the CoroCut XS series with an insert seat size of 3 are the intended platform for this insert.

Key Features

• Solid carbide construction with PVD TiN/TiAlN coating for extended tool life
• 1.5 mm cutting width with a width tolerance of 0.0008 inches for dimensional accuracy
• Left-hand, 0-degree lead angle for straight parting and grooving cuts
• Maximum depth of cut of 6.30 mm (0.248 inches) supports a range of groove depths
• Screw-insert holding method for positive, repeatable clamping
• MACL chipbreaker geometry suited for grooving, parting, and turning applications

Compatibility

Designed for use with CoroCut XS series toolholders and blade bodies accepting an insert seat size of 3 with screw clamping. Specific compatible holder models were not stated in the product data; consult SANDVIK COROMANT tooling catalogs to confirm holder compatibility before ordering.

Installation Notes

Installation is performed by a qualified machinist or CNC tooling technician. Power down and lock out the machine spindle before indexing or replacing inserts. Use the appropriate Torx or hex key for the clamping screw as specified by the toolholder manufacturer — do not overtighten, as this can damage the insert seat. Inspect the insert seat and clamping screw for wear or debris before seating a new insert.