SANDVIK COROMANT Sandvik Coromant 5730412 Turning Insert Dcgt Coroturn 107

Sandvik Coromant 5730412 Turning Insert Dcgt Coroturn 107

SKU: 5730412
Availability: In Stock

Ships same day if ordered by 12 pm

$423.14
$423.14
HAVE A QUESTION?

Our team is ready to help!

  • Voomi Supply

    Secure Payments

  • Voomi Supply

    Easy Returns

  • Voomi Supply

    Expert Advice

  • Voomi Supply

    Fast Shipping

Product Description

The SANDVIK COROMANT 5730412 is a solid carbide turning insert designed for precision external turning operations on CNC lathes and turning centers. Conforming to the DCGT insert style with a 55-degree diamond shape, this insert features an uncoated (bright) H13A carbide grade and a UM chip breaker geometry. It is engineered for light finishing cuts where sharp edges and tight tolerances are required. The inscribed circle measures 3/8 inch (0.3750 inch), insert length is 0.4499 inches, and the corner radius is 0.20 mm (0.0079 inch). Two cutting edges are available per insert. The ISO code for this insert is DCGT 11 T3 02-UM H13A.

This insert is suited for finishing passes on steel and stainless steel workpieces in both production and job-shop environments. The UM chip breaker geometry is optimized for low cutting forces and controlled chip formation at light depths of cut and high surface-finish requirements. It is primarily rated for P-grade (steel) work material and secondarily for M-grade (stainless steel) applications. Installation is performed by machinists and CNC operators maintaining turning toolholders in the CoroTurn 107 series. The screw-clamp holding method provides positive seating and repeatable edge positioning at each insert change.

Key Features

  • Uncoated H13A solid carbide grade for sharp, free-cutting performance on steel and stainless steel
  • UM chip breaker geometry designed for light finishing cuts with controlled chip formation
  • 55-degree diamond insert shape (DCGT style) with 7-degree relief angle for clearance in turning applications
  • 0.20 mm corner radius suitable for fine surface finishes and tight radii on finished parts
  • Two usable cutting edges per insert for extended tool life between insert replacements
  • Screw-clamp holding method for secure, repeatable seating in compatible CoroTurn 107 toolholders

Compatibility

This insert is part of the SANDVIK COROMANT CoroTurn 107 series and is designed for use in CoroTurn 107 toolholders that accept DCGT-style inserts with the corresponding pocket geometry and screw-clamp holding method.

Installation Notes

Insert changes should be performed by a qualified machinist or CNC operator with the machine powered down and spindle fully stopped. Use the appropriate Torx or hex key to remove and seat the clamping screw to the toolholder manufacturer's specified procedure. Inspect the insert pocket for chips or debris before seating the new insert. Handle uncoated carbide inserts with care to avoid edge chipping during installation.

Technical Specifications
Insert Style
DCGT
ISO Code
DCGT 11 T3 02-UM H13A
Insert Shape
55-degree Diamond
Manufacturer Grade
H13A
Insert Material
Solid Carbide
Coating/Finish
Bright/Uncoated
Chip Breaker
UM
Insert Hand
Neutral
Number of Cutting Edges
2
Inscribed Circle
3/8 inch (0.3750 inch)
Insert Length
0.4499 inches (11.43 mm)
Insert Thickness
5/32 inch (0.1563 inch)
Corner Radius
0.20 mm (0.0079 inch)
Relief Angle
7 degrees
Hole Diameter
0.1732 inch (4.40 mm)
Insert Holding Method
Screw
Clearance Code
C
Tolerance Code
G
Primary Workpiece Material
Steel (P)
Secondary Workpiece Material
Stainless Steel (M)
Series
CoroTurn 107
Weight
0.2 pounds
Brand
SANDVIK COROMANT
Manufacturer Part Number
5730412
SANDVIK COROMANT Sandvik Coromant 5730412 Turning Insert Dcgt Coroturn 107

Vendor: SANDVIK COROMANT

Sandvik Coromant 5730412 Turning Insert Dcgt Coroturn 107

$423.14

Vendor: SANDVIK COROMANT

Sandvik Coromant 5730412 Turning Insert Dcgt Coroturn 107

$423.14

Related Products

Customer Support Image

Need Support?

Call Jack and His Team