Sandvik Coromant 5728644 Modular Turning Profiling Head C4

Product Description

The SANDVIK COROMANT 5728644 is a modular turning profiling head designed for use on CNC lathes and turning centers where interchangeable cutting head systems are required. Part of the T-Max P series, this Size C4 head features a 75 mm head length projection and accommodates WNMG 060408 inserts secured by a clamp-style insert holding method. The right-hand cutting direction, combined with a center-to-cutting-edge distance of 13 mm (0.5118 inches), makes this head suitable for both internal and external profiling operations. Through-coolant capability directs fluid directly to the cutting zone for improved chip evacuation and tool life. Licensed machinists and CNC tooling specialists are the primary installers.

This profiling head is suited for both internal and external turning and profiling applications on CNC turning centers where modular quick-change tooling systems are in use. The Size C4 system size with a head connection size of 16 supports rigid setup configurations. A minimum hole diameter of 25 mm (0.9843 inches) and maximum hole depth of 75 mm (2.9528 inches) define the usable internal application envelope. The neck diameter of 40 mm (1.5748 inches) provides clearance geometry typical of profiling head designs used in medium to large bore applications.

Key Features

• T-Max P series modular system, Size C4 with head connection size 16
• Compatible with WNMG 060408 inserts using clamp-style holding
• Through-coolant design for direct coolant delivery to the cutting edge
• Right-hand cutting direction with axial rake of -6 degrees and radial rake of -14 degrees
• Internal or external profiling capability in a single head configuration
• Neck diameter of 40 mm (1.5748 inches) supports bore clearance in medium-to-large applications

Compatibility

Designed for use with SANDVIK COROMANT T-Max P series modular turning systems at Size C4. Compatible insert style is WNMG 060408. Head connection size is 16. Verify compatibility with your specific toolholder shank and machine turret configuration before ordering.

Installation Notes

Installation should be performed by a qualified machinist or CNC tooling specialist. Power down and lock out the machine spindle before mounting or removing any modular tooling head. Follow the tool manufacturer torque guidelines for the modular connection fastener as specified in the T-Max P series assembly documentation. Confirm insert seating and clamp integrity before resuming cutting operations.