Sandvik Coromant 5726508 Grooving Tool Right Hand Solid Carbide

Product Description

The SANDVIK COROMANT 5726508 is a solid carbide internal grooving tool designed for precision groove cutting in small-bore applications. Built from 1025 solid carbide with a TiAlN/TiN finish, this tool delivers thermal resistance and wear performance in demanding turning operations. It cuts a 0.059-inch (1.50 mm) wide groove with a corner radius of 0.0079 inches (0.20 mm), and is configured for right-hand cutting direction. The 8.00 mm shank diameter and 62.00 mm overall length make it suited to CNC turning centers and Swiss-type lathes where tool clearance is tight and dimensional accuracy is critical. Installation and tool changes are performed by qualified machinists and tooling technicians.

This grooving tool is intended for internal grooving operations in bores with a minimum hole diameter of 7.70 mm. It reaches a maximum hole depth of 1.457 inches (37.00 mm), making it practical for shallow to mid-depth internal grooves in precision machined components. Typical applications include snap-ring groove cutting, O-ring groove preparation, and internal profile work on ferrous and non-ferrous materials where a TiAlN/TiN coated solid carbide tool provides the required edge retention and surface finish.

Key Features

• Solid carbide construction for rigidity and wear resistance in tight-bore grooving
• TiAlN/TiN finish provides thermal protection and extended tool life
• 0.059-inch (1.50 mm) groove width for consistent, repeatable groove sizing
• Right-hand cutting configuration for standard CNC turning setups
• 8.00 mm shank diameter fits common small-bore toolholders
• 62.00 mm overall length balances reach with overhang stability

Compatibility

Designed for use in CNC turning centers and Swiss-type lathes accepting an 8.00 mm shank diameter toolholder for internal grooving operations with a minimum bore entry of 7.70 mm.

Installation Notes

Installation should be performed by a qualified machinist or tooling technician. Ensure the machine spindle is fully stopped and locked out before changing or setting tools. Secure the shank in the toolholder to the manufacturer-specified clamping torque for the holder used, and verify tool runout before cutting. Confirm bore clearance meets the 7.70 mm minimum hole diameter requirement before engaging the cut.