Sandvik Coromant 5724110 Turning Insert Ccmt 80 Deg Carbide

Product Description

The SANDVIK COROMANT 5724110 is a CCMT-style indexable turning insert belonging to the CoroTurn 107 series. It carries the ISO designation CCMT 09 T3 02-UF 1125 and is manufactured from solid carbide with a TiAlN and AlCr2O3 PVD coating for extended tool life in demanding cutting conditions. The insert features an 80-degree diamond shape, a 3/8-inch inscribed circle, a 0.0079-inch (0.2 mm) corner radius, and a UF chip breaker geometry. With a neutral hand orientation, it is suited for external turning operations requiring close tolerances and consistent chip control. Two cutting edges are available per insert.

This insert is designed primarily for turning steel (ISO material code P) and is also rated for stainless steel (ISO material code M). The UF chip breaker geometry is optimized for finishing passes at light depths of cut and low feed rates, making it appropriate for applications requiring tight surface finish requirements on steel components. It is used in CNC turning centers and manual lathes equipped with CoroTurn 107-compatible toolholders that accept screw-clamped CCMT inserts with a clearance code of C and tolerance code of M.

Key Features

• ISO designation CCMT 09 T3 02-UF 1125 for straightforward cross-reference and toolholder matching
• TiAlN and AlCr2O3 PVD coating for heat resistance and wear resistance in steel and stainless steel cutting
• 80-degree diamond insert shape (shape code C) provides a strong cutting edge with versatile approach angle options
• UF chip breaker geometry engineered for finishing operations with reliable chip control at low feeds
• Screw-clamped insert holding method ensures secure, repeatable seating in compatible toolholders
• Two usable cutting edges per insert for cost-effective tooling management

Compatibility

Designed for use in CoroTurn 107 series toolholders accepting CCMT-style inserts with clearance code C and tolerance code M. Compatible toolholders must accommodate a 3/8-inch (0.375-inch) inscribed circle and a screw-clamping insert holding method. Verify toolholder pocket geometry against the ISO designation CCMT 09 T3 02-UF before installation.

Installation Notes

Insert installation and indexing should be performed by a qualified machinist or CNC tooling technician. Power down and lock out the machine spindle before handling inserts. Use the appropriate Torx or hex key to the toolholder manufacturer's specified seating procedure when tightening the clamping screw - do not overtighten, as this can fracture the carbide insert. Inspect the toolholder pocket for chips or debris before seating a new insert to ensure proper contact and repeatability.