Sandvik Coromant 5724094 Turning Insert Ccgt Carbide

Product Description

The SANDVIK COROMANT 5724094 is a solid carbide turning insert in the CCGT style, designed for precision external turning operations on CNC lathes and turning centers. Part of the CoroTurn 107 series, this insert features an 80-degree diamond shape with a neutral hand orientation and an uncoated bright finish. The H13A carbide grade delivers sharp cutting action suited for light finishing passes. Key specs include a 3/8 inch (0.3750 inch) inscribed circle, a 0.20 mm (0.0079 inch) corner radius, and an insert length of 9.47 mm (0.3729 inches). It is installed using a screw-type holding method and offers two cutting edges per insert.

This insert is intended for turning steel and stainless steel workpieces where tight tolerances and fine surface finishes are required. The UM chip breaker geometry is optimized for light to medium finishing cuts at higher cutting speeds. The CCGT insert shape with a 7-degree relief angle and G tolerance code make it suitable for close-tolerance finishing work in both production and job-shop environments. The ISO designation for this insert is CCGT 09 T3 02-UM H13A. Licensed machinists and CNC operators install this insert type on compatible turning toolholders accepting CCGT 09 T3 inserts.

Key Features

• Solid carbide, bright/uncoated finish for sharp edge retention on finishing cuts
• H13A grade optimized for steel and stainless steel workpiece materials
• UM chip breaker geometry for light to medium finishing passes
• 80-degree diamond insert shape with 7-degree relief angle for clearance during turning
• Two usable cutting edges per insert
• Screw-mounted (insert holding method) for secure seating in CoroTurn 107 compatible toolholders

Compatibility

This insert carries ISO code CCGT 09 T3 02-UM H13A and is part of the SANDVIK COROMANT CoroTurn 107 series. It is designed for use with toolholders that accept CCGT 09 T3 style inserts with a screw clamping method. Primary workpiece material compatibility is steel (ISO P) and secondary is stainless steel (ISO M).

Installation Notes

Installation is performed by qualified machinists or CNC tooling technicians. Power down and lock out the machine spindle before seating or indexing the insert. Use the correct Torx or hex key for the insert screw and do not overtighten, as carbide inserts are brittle and can crack under excess clamping force. Inspect the insert pocket and screw for debris or damage before each installation.