Sandvik Coromant 5723630 Turning Insert Ccmt 2015 Carbide

Product Description

The SANDVIK COROMANT 5723630 is a solid carbide turning insert from the CoroTurn 107 series, designed for precision external and internal turning operations. It carries ISO designation CCMT 09 T3 04-MM 2015 and features a CVD-applied multilayer coating of TiCN, Al2O3, and TiN for wear resistance and thermal stability at the cutting edge. The insert measures 0.365 inches in length with a 3/8-inch inscribed circle and a 1/64-inch corner radius. Grade 2015 is optimized for machining stainless steel and other ISO M-group workpiece materials. The MM chip breaker geometry promotes controlled chip formation during medium turning passes. Installed by machinists and CNC programmers in production and job-shop environments.

This insert is suited for turning stainless steel and similar ISO M-group materials in both production and maintenance machining contexts. The CCMT insert style and neutral hand orientation make it compatible with a wide range of CoroTurn 107 toolholders designed for screw-clamped, 80-degree diamond inserts. Typical applications include external diameter turning, facing, and light profiling where consistent chip control and edge life are required.

Key Features

• CVD multilayer coating: TiCN, Al2O3, and TiN for wear and heat resistance
• MM chip breaker for controlled chip formation in medium turning
• 80-degree diamond insert shape (CCMT) with neutral hand for versatile toolholder mounting
• Grade 2015 optimized for stainless steel and ISO M-group workpiece materials
• Screw-clamped holding method with 2 usable cutting edges per insert
• ISO designation CCMT 09 T3 04-MM 2015 for direct cross-reference ordering

Compatibility

Designed for use with CoroTurn 107 series toolholders that accept CCMT 09 T3 04 style screw-clamped inserts. Consult SANDVIK COROMANT toolholder documentation to confirm correct seating and clamping compatibility before installation.

Installation Notes

Turning insert replacement should be performed by a qualified machinist with the machine powered down and the spindle locked per the machine tool manufacturer's procedures. Use the correct Torx or hex key to the toolholder manufacturer's specified procedure when seating the clamping screw. Inspect the insert pocket and clamping screw for wear or damage before installing a new insert. Never exceed the cutting parameters specified in the SANDVIK COROMANT grade and geometry application data for grade 2015.