Sandvik Coromant 5723614 Turning Insert CCMT32.52-MR 2035

Product Description

The SANDVIK COROMANT 5723614 is a CCMT-style solid carbide turning insert designed for precision external turning operations. It carries a PVD-applied TiAlN and TiN dual coating and belongs to the CoroTurn 107 series. The insert features an 80-degree diamond shape, a 7-degree relief angle, and a 1/32 inch (0.0313 inch) corner radius. With an inscribed circle of 3/8 inch and an insert length of 0.3493 inches, it is sized for light to medium material removal. The MR chip breaker geometry is optimized for controlled chip flow during finishing and semi-finishing passes. Licensed machinists and CNC lathe operators working in job shop or production environments are the primary installers.

This insert is intended for turning stainless steel workpieces, corresponding to ISO material group M. The CoroTurn 107 series targets applications where screw-clamped insert holding is required with positive-rake toolholder systems. The CCMT insert style, neutral hand orientation, and two available cutting edges make it suitable for general-purpose external turning and facing cycles where surface finish and edge consistency are priorities on corrosion-resistant alloys.

Key Features

• PVD-coated TiAlN and TiN layers for elevated heat resistance and extended edge life on stainless steel
• 80-degree diamond insert shape (Shape Code C) provides strong cutting edge geometry with good clearance
• MR chip breaker geometry supports controlled chip breaking during finishing and semi-finishing cuts
• Screw-clamped holding method (Clearance Code C, Tolerance Code M) for secure seating in compatible toolholders
• Neutral hand orientation allows use in both right-hand and left-hand toolholder configurations
• Two cutting edges per insert maximizes cost-per-edge value

Compatibility

Designed for use in CoroTurn 107 series screw-clamped toolholders that accept CCMT 09 T3 08 insert geometry (ISO Code CCMT 09 T3 08-MR 2035). Intended primarily for machining stainless steel (ISO material group M). No additional specific compatible model numbers were provided in the product data.

Installation Notes

Insert indexing and replacement should be performed by a qualified machinist with the machine fully powered down and the spindle locked. Use the correct Torx or hex key specified by the toolholder manufacturer to seat the clamping screw — do not use impact tools on the insert screw. Inspect the insert pocket and seating surface for chips or debris before installing a new edge. Follow all applicable machine shop safety procedures and consult the toolholder documentation for correct clamping torque guidance.