Sakrete of North America 60201130 Concrete Patcher 40 Lb

Product Description

The SAKRETE OF NORTH AMERICA 60201130 is a self-bonding concrete patcher formulated to resurface and repair broken, chipped, or deteriorated concrete surfaces. Packaged in a 40-pound bag, this dry-mix product activates with the addition of water and is applied by trowel directly over existing concrete. Its self-bonding chemistry eliminates the need for a separate bonding agent, creating a mechanical and chemical bond that outperforms standard portland cement mixes. Designed for use by concrete finishers, masonry contractors, and experienced maintenance technicians, it delivers a smooth, finished surface suitable for both structural repair and cosmetic restoration.

This patcher is suited for residential and commercial flatwork repair applications including driveways, sidewalks, steps, garage floors, and other horizontal concrete surfaces showing surface wear, cracking, or spalling. It can be applied as a trowel-on patch for localized repairs or brushed on as a thin coat for broader surface restoration. The mix is appropriate for situations where an existing slab is structurally sound but the surface layer has degraded and requires a bonded resurfacing layer.

Key Features

• Self-bonding formula — no separate bonding agent required
• Bonds stronger than standard cement mixes for durable repairs
• Suitable for both trowel application and brush coat application
• Simple mix process — just add water, no special equipment needed
• Produces a bright, finished surface appearance after cure
• 40-pound unit provides sufficient volume for moderate repair areas

Compatibility

Designed as an OEM-style replacement-grade surface repair material for use over existing structurally sound portland cement concrete substrates.

Installation Notes

Surface preparation is critical — existing concrete must be clean, free of oil, grease, and loose material before application. Masonry contractors should follow ASTM and local building code requirements for surface repair work. Do not apply to frozen surfaces or when ambient temperatures are expected to fall below 40 degrees F within 24 hours of placement. Allow adequate cure time before returning the surface to traffic or load-bearing use.