Rust-oleum 964402 Industrial Enamel Paint Gloss Safety Red 10 Gal

Product Description

The RUST-OLEUM 964402 is a solvent-based industrial enamel paint formulated for rust prevention on steel and other metal surfaces. Supplied in a 10-gallon can in a high-gloss Safety Red finish, it delivers a coverage rate of 255 to 435 square feet per gallon depending on surface profile and application method. The formula goes on direct-to-metal without a separate primer coat, which reduces labor steps on steel fabrication, equipment repaints, and structural maintenance work. VOC content is 450 g/L, making it a solvent-heavy coating appropriate for well-ventilated or outdoor work environments. Tack-free time is 4 hours, full cure is reached at 7 hours, and recoat window opens at 24 hours.

This enamel is rated for both indoor and outdoor use and is suited to industrial maintenance painting on structural steel, machinery, tanks, railings, and similar metal substrates. The Safety Red color meets common safety-marking and equipment identification conventions used in industrial facilities. Application temperature range is 32 degrees F minimum to 100 degrees F maximum, making it practical for most seasonal field conditions. It is applied by brush, roller, or spray depending on the surface geometry and desired finish quality.

Key Features

• Direct-to-metal formula — no separate primer required on steel
• High-gloss Safety Red finish suitable for safety marking and equipment identification
• Coverage rate of 255 to 435 square feet per gallon
• Tack-free in 4 hours, fully dry in 7 hours
• Solvent-based composition for strong adhesion on industrial steel surfaces
• Rated for indoor and outdoor use across a 32 degrees F to 100 degrees F application range

Compatibility

Designed as a direct-to-metal rust preventative enamel for steel and metal surfaces in industrial maintenance and facility painting applications.

Installation Notes

Surface preparation is critical — remove loose rust, mill scale, oil, and contaminants before application to ensure adhesion. Use in well-ventilated areas or with appropriate respirator protection given the 450 g/L VOC content of this solvent-based product. Do not apply below 32 degrees F or above 100 degrees F, and avoid application in high humidity or direct sun on hot metal. Allow the full 24-hour recoat window before applying additional coats.