Rust-oleum 9104402 Fast Dry Activator 1 Gallon

Product Description

The RUST-OLEUM 9104402 is a fast dry activator supplied in a 1-gallon can, formulated to accelerate the cure and dry time of compatible RUST-OLEUM coating systems. It delivers a coverage rate of 115 to 190 square feet per gallon depending on application method and surface condition. With a dry time of 5 hours and a VOC content of 340 g/L, this activator is suited for use in commercial and industrial coating applications where fast turnaround is a priority. It is intended to be mixed with specific compatible topcoats and finishes rather than applied on its own. Licensed painters and coating applicators typically handle this product in professional settings.

This activator is designed for use across a wide range of application environments, including industrial maintenance, equipment refinishing, and structural coating projects. It performs within an ambient temperature range of 50 degrees F to 120 degrees F, making it suitable for most interior and exterior conditions encountered during a standard coating job. The 1-gallon container size is appropriate for single-job use or small to mid-scale projects.

Key Features

• Coverage rate of 115 to 190 square feet per gallon depending on surface and application
• 5-hour dry time supports faster project turnaround
• VOC content of 340 g/L — verify local regulatory compliance before use
• Application temperature range from 50 degrees F to 120 degrees F
• Supplied in a 1-gallon metal can for easy measuring and mixing
• Compatible with multiple RUST-OLEUM coating products — see compatibility section

Compatibility

Per manufacturer data, this activator is intended for use with the following part numbers: 00243329, 00243345, 00243360, 46923116, 07144959, 00243303, 84569482, 00243485, 07836745, 37692209, 55573976, 00243386, 94120177, and 00243287. Do not use with coatings not listed by the manufacturer as compatible.

Installation Notes

This product is applied by professional painters and industrial coating technicians. Always follow the coating manufacturer's mixing ratio instructions before combining the activator with a topcoat or finish. Ensure adequate ventilation in the work area, and consult applicable safety data sheets prior to handling. Do not apply outside the stated temperature range, as this will affect cure performance and film integrity.