Rust-oleum 9102402 Water Immersion Activator 1 Gal

Product Description

The RUST-OLEUM 9102402 is a water immersion activator designed for use with hydrographic film printing systems. It activates the polyvinyl alcohol film layer on the water surface, allowing decorative patterns to transfer cleanly onto three-dimensional parts during the water transfer printing process. Coverage ranges from 100 to 175 square feet per gallon depending on application technique. VOC content is above 250 g/L. This product is handled by finishing technicians, custom fabricators, and production shops running hydrographic dip processes.

This activator is suited for production and custom finishing environments where water transfer printing is applied to automotive parts, sporting goods, consumer products, and other rigid substrates. It is packaged in a 1-gallon can and is intended for direct use in hydrographic dip tank setups. It is compatible with a defined set of hydrographic film products and should be matched to the correct film for predictable pattern transfer results.

Key Features

• Coverage of 100 to 175 square feet per gallon depending on film type and spray technique
• VOC content above 250 g/L — verify local regulatory compliance before use
• Dry time of 14 hours under standard conditions
• Packaged in a 1-gallon metal can for direct use or controlled dispensing
• Compatible with a broad range of RUST-OLEUM hydrographic film SKUs

Compatibility

Compatible with the following hydrographic film products as specified by the manufacturer: 00243329, 00243345, 00243360, 46923116, 07144959, 00243303, 84569482, 00243485, 07836745, 37692209, 55573976, 00243386, 94120177, and 00243287.

Installation Notes

Application is performed by finishing technicians experienced with hydrographic or water transfer printing processes. Ensure adequate ventilation when spraying the activator, as VOC content requires appropriate respiratory protection per local safety standards. Follow the film manufacturer's recommended dwell time between activator application and part dipping to achieve consistent pattern transfer. Store the container sealed and away from heat sources when not in use.