Rust-oleum 6010408 Epoxy Coating 1 Gal High Gloss Clear

Product Description

The RUST-OLEUM 6010408 is a water-based epoxy protective coating designed to seal and protect concrete surfaces with a durable, high-gloss clear finish. Packaged in a 1-gallon can, this solvent- and water-based formula delivers a VOC content of 250 grams per liter and covers 200 to 350 square feet per gallon depending on surface porosity and application method. The coating resists heavy foot traffic and occasional contact from lightweight rubber-wheeled vehicles, making it a practical solution for garage floors, warehouse walkways, and similar concrete surfaces. Licensed contractors and facility maintenance professionals are the typical installers.

This coating is formulated for application directly to concrete substrates in both residential and light commercial settings. It performs best in controlled temperature conditions between 60 degrees F and 100 degrees F at time of application. Typical use cases include interior concrete floors that require a cleanable, hard-wearing surface layer. The high-gloss clear finish allows the natural appearance of the substrate to show through while adding a protective barrier against wear and surface contamination.

Key Features

• Water-based epoxy formula with solvent-based performance characteristics
• High-gloss clear finish — preserves the look of the underlying concrete
• Coverage of 200 to 350 square feet per gallon
• Resists heavy foot traffic and lightweight rubber-wheeled vehicle contact
• Light traffic ready in 16 hours; recoat window opens at 2 hours; fully cured in 72 hours
• VOC content of 250 g/L

Compatibility

Designed for use on concrete surfaces as an OEM-style protective topcoat or sealer in residential and light commercial applications.

Installation Notes

Surface preparation is critical — concrete must be clean, dry, and free of oils, existing coatings, or efflorescence before application. Apply using a roller, brush, or sprayer rated for epoxy coatings. Do not apply below 60 degrees F or above 100 degrees F, and avoid application if rain or high humidity is expected within the drying window. Allow a full 72 hours of cure time before subjecting the surface to heavy loads or chemical exposure.