Rust-oleum 346955 Enamel Spray Paint Marigold Gloss 12 Oz

Product Description

The RUST-OLEUM 346955 is a gloss enamel aerosol spray paint in Marigold, a yellow-family finish suited for a wide range of general-purpose coating work. The 12-ounce aerosol can delivers a hard enamel film rated for both interior and exterior applications. Tack-free dry time is 20 minutes, with a full recoat window opening at 1 hour. Application temperature range runs from 50 to 90 degrees F. Coverage is approximately 8 square feet per can depending on surface porosity and application technique. This product is used by contractors, maintenance technicians, and facilities crews who need a fast-drying enamel finish on multi-purpose substrates.

The 346955 is formulated for multi-purpose use across indoor and outdoor environments. Typical applications include touch-up and finish coating on metal, wood, and other common substrates in residential, commercial, and light industrial settings. The gloss finish and Marigold color make it suitable for identification marking, equipment coating, and general maintenance painting where a durable aerosol enamel is specified. Apply within the 50 to 90 degrees F temperature range for proper film formation and adhesion.

Key Features

• Gloss enamel finish in Marigold, a yellow-family color
• Tack-free in 20 minutes; recoat at 1 hour
• Rated for indoor and outdoor use, interior and exterior surfaces
• Application temperature range: 50 to 90 degrees F
• 12-ounce aerosol can; approximately 8 sq ft coverage per can
• Aerosol delivery for consistent, brush-free application

Compatibility

Designed as a general-purpose enamel spray paint for multi-purpose indoor and outdoor applications on common substrates in residential, commercial, and light industrial environments.

Installation Notes

Shake the can thoroughly before use and test spray on a scrap surface before applying to the workpiece. Apply only when ambient and surface temperatures are between 50 and 90 degrees F to ensure proper adhesion and film formation. Ensure adequate ventilation when using indoors, and follow applicable local safety codes and SDS guidance for aerosol coatings. Do not apply over incompatible coatings without proper surface preparation.