Rust-oleum 334026 Gloss Black Spray Paint 12 Oz

Product Description

The RUST-OLEUM 334026 is a gloss black, acrylic enamel aerosol spray paint formulated for fast, even coverage on a wide range of surfaces. Part of the Ultra Cover 2X line, it delivers expanded coverage of 7 to 8 square feet per can using a solvent-based, liquid formula with a specific gravity of 0.741. The finish cures to the touch in 20 minutes and is ready to handle within 1 hour at 70 to 80 degrees F and 50 percent relative humidity. Recoating should occur within 1 hour or after a full 48-hour cure window. This product is intended for use by painters, contractors, maintenance technicians, and experienced DIYers who need a durable, gloss finish applied quickly from an aerosol can.

The 334026 is suited for both indoor and outdoor applications. It bonds to wood, metal, and plastic surfaces, making it a practical choice for equipment touch-ups, structural components, maintenance painting, and general-purpose finishing tasks. The 12-ounce aerosol can format works well for targeted application on smaller surfaces, fixtures, furniture, and light industrial components where brush or roller application is impractical.

Key Features

• Gloss black finish with 7 to 8 sq-ft coverage per 12-oz can
• Touch-dry in 20 minutes at standard temperature and humidity conditions
• Adheres to wood, metal, and plastic without a dedicated primer in many applications
• Aerosol delivery provides consistent, even spray with no brush marks
• Formulated for indoor and outdoor durability

Compatibility

Designed for application on wood, metal, and plastic surfaces in both interior and exterior environments where a gloss enamel aerosol finish is required.

Installation Notes

Surface preparation is critical — clean, dry, and lightly scuff surfaces for best adhesion before spraying. Shake the can thoroughly and apply in thin, even coats from a consistent distance as indicated on the product label. Use in a well-ventilated area due to solvent odor and a VOC content of 513 g/L. Observe all local regulations regarding aerosol solvent-based coatings, flash point handling at -156 degrees F, and proper disposal of aerosol containers.