Rust-oleum 255613 Alkyd Enamel Paint Gloss Navy Gray

Product Description

The RUST-OLEUM 255613 is a gloss alkyd enamel paint formulated for direct-to-metal application on steel and other hard surfaces. It delivers a durable, high-sheen finish in Navy Gray and is suitable for both indoor and outdoor use. Coverage ranges from 265 to 440 square feet per gallon, making it efficient across a variety of project scales. With a VOC content of 100 grams per liter, it meets many low-VOC application requirements. The formula goes on tack-free in 4 hours and reaches full cure in 12 hours, supporting productive turnaround on service calls or facility maintenance work.

This alkyd enamel is designed for metal surfaces in industrial, commercial, and facility maintenance environments. It performs well on structural steel, equipment housings, railings, ductwork, and similar metal components exposed to interior or exterior conditions. The gloss finish resists moisture and provides a cleanable surface, making it a practical choice for maintenance painters, facility technicians, and trade contractors who need a reliable direct-to-metal coating with predictable dry times and broad application temperature tolerance.

Key Features

• Direct-to-metal formula bonds to steel without a separate primer in many applications
• Gloss finish in Navy Gray provides a durable, cleanable surface
• Coverage of 265 to 440 square feet per gallon depending on surface porosity and method
• Tack-free in 4 hours, fully dry in 12 hours, recoatable at 24 hours
• Application temperature range of 32 to 100 degrees F
• 100 g/L VOC content for compliance in many regulated environments
• Suitable for indoor and outdoor use on metal surfaces

Compatibility

Designed for use on steel and metal surfaces in both indoor and outdoor settings. Suitable as a direct-to-metal coating for structural components, equipment, and metal fixtures.

Installation Notes

Surface preparation is critical before applying alkyd enamel to metal — remove rust, mill scale, grease, and loose paint by mechanical or chemical means before coating. Apply within the stated temperature range of 32 to 100 degrees F and avoid application in high-humidity conditions or direct sunlight when possible. Allow full recoat dry time of 24 hours before applying additional coats. Dispose of materials and clean equipment in accordance with local VOC regulations and applicable safety data sheet guidance.