Rust-oleum 251212 Epoxy Floor Coating 1 Gal Gray

Product Description

The RUST-OLEUM 251212 is a water-based epoxy floor coating formulated for durable surface protection in demanding environments. It delivers a hard, chemical-resistant finish rated at 0 g/L VOC, making it compliant with strict air-quality regulations. Coverage runs 230 to 340 square feet per gallon depending on surface porosity and application method. The gray finish suits industrial and commercial floors where a clean, professional appearance and long-term wear resistance are required. This coating is applied by painting contractors, maintenance technicians, and facilities personnel working on concrete and masonry floor surfaces.

This epoxy floor coating is intended for use on interior concrete floors in commercial, industrial, and light-duty residential settings. Typical applications include garage floors, warehouse floors, utility rooms, and similar surfaces that see regular foot traffic or vehicle traffic. The 1-gallon can size suits smaller project areas or touch-up work. The gray color integrates with standard concrete finishing schemes and pairs well with floor marking and safety striping systems.

Key Features

• Zero VOC formula (0 g/L) meets low-emission and air-quality compliance requirements
• Coverage of 230 to 340 square feet per gallon on properly prepared surfaces
• Tack-free in 30 minutes, supporting fast turnaround on job sites
• Full dry time of 30 minutes with a 3-hour recoat window
• Epoxy formula provides chemical and abrasion resistance for floor applications
• Packaged in a 1-gallon can for easy handling and accurate quantity ordering

Compatibility

Designed as an OEM-style epoxy floor coating for application on prepared interior concrete and masonry floor surfaces in commercial and industrial settings.

Installation Notes

Surface preparation is critical before applying epoxy coatings — concrete must be clean, dry, and free of oil, grease, and existing coatings that could prevent adhesion. Apply using a roller, brush, or sprayer appropriate for floor coatings; follow local building and environmental codes governing VOC-compliant coatings. Allow adequate ventilation during application and drying. Do not apply to surfaces exposed to standing water or hydrostatic pressure.