Rust-oleum 245387 Alkyd Enamel Paint Flat Black

Product Description

The RUST-OLEUM 245387 is a flat black alkyd enamel paint formulated for both indoor and outdoor use. It applies directly to metal surfaces without a primer, making it a practical choice for maintenance and protective coating work on structural components, equipment, and fabricated metal. The 1,280 fl oz can size suits larger jobs where coverage efficiency matters. With a VOC content of 340 g/L and a coverage rate of 230 to 425 square feet per gallon, this enamel delivers a durable, uniform flat finish suited for professional application environments.

This paint is appropriate for use across a wide range of trade applications including HVAC equipment housings, ductwork exteriors, pipe supports, electrical conduit, and general maintenance painting on ferrous metal surfaces. Its direct-to-metal formulation reduces prep steps in the field. Suitable for use in both residential and commercial settings, it is typically applied by maintenance technicians, industrial painters, and trade contractors working in controlled or outdoor environments with temperatures between 32 and 100 degrees F.

Key Features

• Direct-to-metal application — no separate primer required
• Flat black finish suitable for equipment, structural, and utility surfaces
• Coverage rate of 230 to 425 square feet per gallon
• Tack-free in 4 hours, fully dry in 8 hours, recoat-ready in 24 hours
• Rated for use in temperatures from 32 to 100 degrees F
• Large 1,280 fl oz can size reduces the need for multiple containers on larger jobs

Compatibility

Designed for direct application to metal surfaces in indoor and outdoor environments. Suitable for general-purpose metal coating across maintenance, industrial, and trade applications.

Installation Notes

Application should be performed by qualified painters or trade professionals familiar with alkyd-based coatings. Surface must be clean, dry, and free of rust, grease, and loose material before application. Ensure adequate ventilation when applying indoors, and do not apply when ambient temperatures fall below 32 degrees F or exceed 100 degrees F. Allow full cure time before exposing the coated surface to moisture or mechanical contact.