Rust-oleum 210495 Acrylic Enamel Paint 1 Gal Safety Yellow

Product Description

The RUST-OLEUM 210495 is a water-based acrylic enamel paint formulated for multi-purpose coating applications across a wide range of surfaces. It delivers a gloss finish in Safety Yellow and applies directly to metal, masonry, and wood without a separate primer in many applications. Coverage ranges from 165 to 520 square feet per gallon depending on surface porosity and application method. The paint reaches a tack-free state in 30 minutes and allows recoating in as little as 1 hour, reducing downtime on job sites. Cleanup requires only soap and water. This product is suited for professional tradespeople, facilities maintenance staff, and contractors who need a durable, fast-drying coating.

This acrylic enamel is designed for both indoor and outdoor use, making it appropriate for a broad range of commercial and industrial maintenance scenarios. Typical applications include equipment marking, safety color-coding, structural steel, shop floors, concrete masonry, and wood surfaces. The Safety Yellow color meets common visibility and hazard-marking conventions used in industrial and facilities environments. Application temperature range is 50 to 100 degrees F, which covers most standard working conditions.

Key Features

• Water-based acrylic enamel formula — soap and water cleanup
• Direct-to-metal application without a separate primer step
• Tack-free in 30 minutes, recoatable in 1 hour
• Coverage of 165 to 520 square feet per gallon depending on substrate
• Suitable for masonry, wood, and metal surfaces
• Gloss finish in Safety Yellow for high-visibility and hazard-marking use

Compatibility

Designed for use on metal, masonry, and wood substrates in both indoor and outdoor environments. Suitable as a multi-purpose maintenance paint for equipment, structures, and surfaces requiring a durable gloss enamel finish.

Installation Notes

Surface preparation is critical before application — remove loose paint, rust, grease, and contaminants for best adhesion. Apply within the recommended temperature window of 50 to 100 degrees F and avoid application in high-humidity conditions or direct sunlight when possible. Allow full dry time before subjecting the coated surface to service conditions. Follow all applicable local safety and ventilation requirements when working in enclosed spaces.