Rust-oleum 203030V White Marking Paint 17 Oz

Product Description

The RUST-OLEUM 203030V is a 17 oz solvent-based marking paint in a gloss white finish, designed for fast, legible line marking on job sites and utility applications. The formula dries tack-free in approximately 5 minutes and can be applied in temperatures as low as 25 degrees F, making it suitable for cold-weather fieldwork. Each can delivers 600 to 700 linear feet of coverage at 1 inch wide. Licensed contractors, utility locators, and facilities maintenance crews rely on this product for quick, durable surface marking where visibility and fade resistance matter.

This marking paint is used across a wide range of surfaces including concrete, grass, gravel, and pavement, making it a practical choice for construction layout, utility marking, and site preparation work. Its solvent-based composition produces bold, easy-to-read markings that resist early fading and chalking. The 17 oz can is intended for use with the Rust-Oleum marking paint applicator system for upright or inverted spraying, depending on the tool configuration used on site.

Key Features

• 600 to 700 linear feet of coverage per can at 1 inch wide
• Tack-free dry time of 5 minutes supports fast-paced work schedules
• Usable in temperatures as low as 25 degrees F
• Gloss white finish creates high-visibility, easy-to-read markings
• Resists early fading and chalking on outdoor surfaces
• Works on concrete, grass, gravel, pavement, and similar surfaces

Compatibility

Compatible with the Rust-Oleum marking paint applicator system. Designed for use on concrete, grass, gravel, pavement, and similar hard or soft outdoor surfaces common to construction, utility, and facilities maintenance applications.

Installation Notes

Application is typically performed by facilities maintenance crews, utility locators, or contractors familiar with line-marking equipment. Shake the can thoroughly before use and verify the applicator tool is configured for the desired spray orientation. Avoid application to wet surfaces or in conditions where temperatures are expected to drop below 25 degrees F during the drying window. Follow all local safety and environmental regulations for solvent-based aerosol products when working in enclosed or partially enclosed spaces.