Rivetking /SBS830CM/SET/P10 Blind Rivet 8-30 Steel 10pk

Product Description

The RIVETKING /SBS830CM/SET/P10 is a flush-on-both-sides blind rivet designed for applications where a smooth surface is required on both the near and far side of the fastened joint. Built with a steel body and steel mandrel, this size 8-30 rivet features a dome head profile and accepts a 0.255-inch minimum hole diameter. The grip range spans 1.625 inches to 1.875 inches, making it suitable for fastening material stacks of moderate thickness. This package contains 10 rivets. Installation is performed with a standard blind rivet tool, and no access to the back side of the workpiece is required.

This rivet is used in structural and sheet-metal assembly applications where both surfaces of the joined material must remain flush and snag-free. Typical install scenarios include enclosure fabrication, equipment panels, ductwork, and similar metalworking tasks in commercial and industrial settings. The all-steel construction handles the mechanical loads common in trade and light industrial work. Installers working in HVAC, electrical, and general sheet-metal fabrication will find this rivet appropriate for panels and brackets requiring a clean, flush finish on both faces of the joint.

Key Features

• Flush finish on both sides of the joint - no protruding head or mandrel remnant on either face
• Size 8-30 with a grip range of 1.625 inches to 1.875 inches
• Steel body and steel mandrel for strength in metalworking applications
• Dome head type with a 0.625-inch head diameter and 0.100-inch head height
• Body diameter of 0.250 inches; minimum hole diameter of 0.255 inches
• Sold in a 10-piece package; minimum order quantity of 1 package

Compatibility

Designed as a standard blind rivet replacement for size 8-30 flush-on-both-sides rivet applications requiring a 0.250-inch body diameter and a grip range of 1.625 inches to 1.875 inches.

Installation Notes

Install with a hand-operated or pneumatic blind rivet tool sized for a 0.250-inch rivet body. Drill or punch the mating hole to a minimum diameter of 0.255 inches before installation. Ensure all material layers are clamped flush before setting the rivet, as gaps in the stack will affect grip engagement. Wear appropriate eye protection during installation to guard against mandrel ejection.