Rivetking /SBS814CM/SET/P10 Blind Rivet 8-14 Steel 10pk

Product Description

The RIVETKING /SBS814CM/SET/P10 is a flush-on-both-sides blind rivet designed for applications where a clean, low-profile surface is required on the blind side as well as the set side. Built with a steel body and steel mandrel, this dome-head rivet carries a size code of 8-14, a body diameter of 0.25 inches, and a grip range of 0.75 to 0.875 inches. It is sold in a pack of 10 and is suited for sheet metal assembly, HVAC panel work, ductwork fabrication, and other trade installations where access is limited to one side of the workpiece.

This rivet is used in residential and light commercial applications including HVAC equipment panels, electrical enclosures, plumbing fixtures, and general sheet metal work. The flush-on-both-sides design eliminates protruding rivet tails on the blind side, making it appropriate for installations where clearance is tight or where a finished appearance on both surfaces is required. Licensed sheet metal workers, HVAC technicians, and general trade contractors are the primary installers of this fastener type.

Key Features

• Flush profile on both the set side and blind side for low-clearance and finished-surface applications
• Steel body and steel mandrel provide reliable shear and tensile strength for metal-to-metal fastening
• Dome head style with a head diameter of 0.625 inches and head height of 0.1 inches
• Grip range of 0.75 to 0.875 inches accommodates a range of material stack thicknesses
• Minimum hole diameter of 0.255 inches for standard drill sizing in sheet metal work
• Sold in a 10-count pack to match small-quantity job needs

Compatibility

Designed as an OEM-style blind rivet replacement for size 8-14 applications requiring a flush both-sides profile with a 0.25-inch body diameter and a grip range of 0.75 to 0.875 inches.

Installation Notes

Installation requires a standard blind rivet pull tool sized for a 0.255-inch minimum hole diameter. Drill or punch the workpiece to the correct hole size before setting the rivet. Ensure all material layers are clamped flush before pulling the mandrel. Follow applicable sheet metal fabrication codes and wear appropriate eye protection during installation.