Rivetking ABS84-86RTP250 Blind Rivet Dome Head 250 Pack

Product Description

The RIVETKING ABS84-86RTP250 is a size 84-86 blind rivet with a dome head profile, aluminum body, and zinc-plated steel mandrel, sold in a 250-piece package. This style of blind rivet is installed from one side of the workpiece using a standard rivet gun, making it a practical fastener wherever backside access is limited. The aluminum body provides corrosion resistance and light weight, while the steel mandrel delivers reliable pull strength. Key structural ratings are 900 pounds tensile strength and 630 pounds shear strength. The dome head measures 0.511 inches in diameter with a head height of 0.070 inches, and the body diameter is 0.250 inches (1/4 inch nominal).

This rivet suits a broad range of sheet-metal and light structural assembly applications common in HVAC ductwork fabrication, electrical panel assembly, plumbing supports, and general mechanical construction. The 0.156 to 0.375 inch grip range accommodates a variety of material stack thicknesses. The minimum hole diameter is 0.257 inches and maximum is 0.261 inches, matching a drill size F. The 250-piece package quantity is appropriate for contractors and service shops that need a reliable bench stock of standard pull rivets for everyday field and shop work.

Key Features

• Dome head profile distributes clamping load across a 0.511-inch head diameter
• Aluminum body resists corrosion and keeps installed weight low
• Zinc-plated steel mandrel enhances mandrel strength and surface protection
• 900-pound tensile strength and 630-pound shear strength for reliable fastening
• Grip range of 0.156 to 0.375 inches handles varied material stack thicknesses
• 250-piece package supports high-volume shop and field use

Compatibility

Designed as a standard size 84-86 blind rivet for use in applications requiring a 0.257 to 0.261 inch hole, compatible with manual, pneumatic, and battery-powered rivet tools accepting 1/4-inch body diameter rivets.

Installation Notes

Install using a rivet gun rated for 1/4-inch aluminum blind rivets. Drill or punch the mating hole to between 0.257 and 0.261 inches before installation; an undersized hole will prevent full seating and an oversized hole will reduce clamp load. Ensure both workpieces are clean and properly aligned before pulling the mandrel. The spent mandrel stem will eject upon break - use appropriate eye protection during installation per standard shop safety practice.