Resideo q347a1012/u Spark Igniter 90 Degree

Product Description

The RESIDEO q347a1012/u is a spark igniter designed for use in gas-fired heating systems where direct spark ignition is required. The assembly includes an inner Kanthal electrode with a ceramic insulator, a mounting bracket, and a Kanthal ground strap. The 90-degree half-inch right-angle configuration positions the electrode correctly in tight burner compartments where a straight igniter cannot fit. Licensed HVAC technicians install this part during ignition system repairs or full igniter replacements on residential and light commercial gas appliances.

This spark igniter is intended for residential and light commercial gas heating equipment that relies on direct spark ignition modules. It is compatible with Resideo and Honeywell ignition modules including the S87C, S87D, S87K, S89E, S89F, and Q354A. The right-angle geometry makes it well suited for burner configurations where electrode placement demands a specific approach angle to the burner flame port.

Key Features

• Kanthal electrode construction for high-temperature durability at the burner flame zone
• Ceramic insulator provides electrical isolation between the electrode and bracket
• Kanthal ground strap included for proper spark circuit grounding
• 90-degree half-inch right-angle tip geometry for tight burner compartment access
• Complete assembly includes electrode, insulator, bracket, and ground strap — no additional hardware required

Compatibility

Compatible with Resideo and Honeywell ignition modules S87C, S87D, S87K, S89E, S89F, and Q354A, as specified by the manufacturer.

Installation Notes

Installation should be performed by a licensed HVAC technician. Shut off gas supply and disconnect power to the appliance before removing or installing the igniter. Position the electrode tip at the correct gap distance from the burner as specified in the appliance service manual — do not estimate gap by eye. Follow applicable local codes and manufacturer wiring diagrams when reconnecting the high-voltage ignition lead.

Technical Specifications

• Electrode Material: Kanthal
• Insulator Material: Ceramic
• Tip Angle: 90 degrees
• Tip Offset: 0.5 inches
• Included Components: Electrode, ceramic insulator, mounting bracket, Kanthal ground strap

Standard Information

• Brand: RESIDEO
• Manufacturer Part Number: q347a1012/u